Gebrauchs- und Einbauanweisung Operating and assembly instructions ZANUSSI GLASKERAMIK-KOCHFLÄCHEN CERAMIC BUILT-IN HOBS D GB ZG 1102 / ZGW 1302 / ZGW 1302 X
Dear customer We congratulate you on choosing a ceramic hob of ZANUSSI. Thus you chose quality, innovation and durability. These operating and assembly instructions will allow you to become acquainted with the appliance and to do everything within its possibilities.
Content Please note in particular ........................................ 12 Unpacking and control ........................................... 13 Description of appliances ...................................... 13 Technical data ....................................................... 13 Operating your hob ................................................ 14 Cooking equipment ............................................... 14 Maintenance .........................................................
Please note in particular Before using the hob for the first time, read the operating and assembly instructions carefully. You protect yourself and avoid damage of your appliance. The appliance must be installed by a qualified electrician. Use the hob only upon its installation. This protects you from touching electric parts. Repairs of electric appliances must be undertaken by qualified electricians only. Improper repairs can cause serious harm and danger for the user.
Unpacking and control Please examine the appliance for any damage sustained during transportation! If the appliance is damaged please immediately inform the forwarding company before the appliance is connected. The packing material should be disposed properly. Description of the appliance 2 ZG 1102 / ZGW 1302 / ZGW 1302 X 1) Cooking zone ∅ 180 mm 1700 W 2) Cooking zone ∅ 145 mm 1200 W 3) Cooking zone ∅ 180 mm 1700 W 4) Cooking zone ∅ 145 mm 1200 W 3 1 4 Technical data Typ 011.
Operating your hob Cooking zones The cooking zones are clearly marked on the ceramic surface. They are operated by the corresponding switch box or built-in oven. The dimensions of the cooking zones are such that they accommodate standard sized saucepans. Cooking equipment Specially tested cooking pans for ceramic hobs exist. Pay attention to the declaration of the manufacturer. Cooking pans with aluminium or copper bottoms can cause metallic discolouration that can not be removed anymore.
Maintenance The maintenance remains the same for glass and ceramic hobs. Never use aggressive detergents or scouring powder and sponges with abrasive surfaces. Cleaning after each use Slight, not burnt soiling has to be wiped off with a damp cloth without using detergents. The use of detergents may lead to discolouring. These heavy stains can not be wiped off easily by the first attempt and sometimes not even with a special detergent. Burnt soiling has to be removed with a scraper.
Installation Cut out worktop to prescribed measurements of templates (saw exactly along the scribing). Check seal for perfect fit and overall cover (see detail A). Lower the ceramic hob into place and align correctly. detail A Fastening according to Fig. 1 Tighten bracket against the underside of the worktop. Using a standard or Phillips screwdriver, tighten the tension clamps evenly starting at the centre and moving diagonally until the built-in rim is tight on the worktop.
What to do in case of a defect You are able to clear the following defects: When the cooking zone does not heat up after you switched it on? => Make sure that the fuse is turned on. You hear a buzzing when you heat up a zone? => This is no defect. It stops with increasing heat. Discolouring of a cooking zone? => This is not a change in the material but burnt and not removed food remains. They do not affect the function and the durability of the ceramic hob.
ZG 1102 / ZGW1302 / ZGW 1302 X HN / HNW 112 HN 112 X HN / HNW 114 HN 114 X
A D 07.93 ZANUSSI Haushaltsgeräte GmbH Kundendienst-Zentrale Markhofgasse 19 1034 Wien Tel. Fax : (0222) 79503-Serie : (0222) 798 01 63 (0222) 795 0322 (0222) 795 0323 (Geräteverkauf) (Ersatzteilverkauf) Telex : 132 157 ZANUSSI Elektrogeräte GmbH Rennbahnstrasse 72-74 60528 Frankfurt/Main Tel.
