User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • • • • • • CAUTION: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
guards incorporated in the appliance. The use of inappropriate guards can cause accidents. SAFETY INSTRUCTIONS This appliance is suitable for the following markets: • GB IE MT NG • • INSTALLATION • • • • • • • • • • • • WARNING! Only a qualified person must install this appliance. • WARNING! Risk of injury or damage to the appliance. • Remove all the packaging. Do not install or use a damaged appliance. Follow the installation instructions supplied with the appliance.
GAS CONNECTION WARNING! These instructions are only valid if the country symbol appears on the appliance. If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide the necessary instructions concerning modification of the appliance to the conditions of use of the country. • • • • • All gas connections should be made by a qualified person.
CARE AND CLEANING WARNING! Do not remove the buttons, knobs or gaskets from the control panel. Water may get inside the appliance and cause damage. • • • • • • Clean the appliance regularly to prevent the deterioration of the surface material. Deactivate the appliance and let it cool down before you clean it. Disconnect the appliance from the electrical supply before maintenance. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth.
Please refer to the technical instructions on how to adjust the hob to the gas specifications on Malta. CAUTION! Failure to ensure the correct assembly will cause leakage of gas. This appliance is certified for Malta. CAUTION! Make sure that the gas supply pressure of the appliance obeys the recommended values. Make sure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.
A WARNING! Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position. ELECTRICAL CONNECTION • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug (if applicable). • The appliance must not be connected with an extension cable, an adapter or a multiple socket. There is a risk of fire. • Do not let the power cable to heat up to a temperature of more than 90° C.
3. A min. 600 mm B min. 100 mm min. 650 mm min. 55 mm 30 mm 480+02 mm 560+02 mm 4. 1. Connect the green and yellow (earth) wire to the terminal which is marked with the letter 'E', , or coloured green and or the earth symbol yellow. 2. Connect the blue (neutral) wire to the terminal which is marked with the letter 'N' or coloured blue. 3. Connect the brown (live) wire to the terminal which is marked with the letter 'L'. It must always be connected to the network phase.
A POSSIBILITIES FOR INSERTION The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. Kitchen unit with door or drawer 30 mm A 60 mm B 8. min 20 mm (max 150 mm) B A) supplied seal B) supplied brackets A. Removable panel B. Space for connections Kitchen unit with oven The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven from the unit.
CONTROL KNOB Symbol Symbol Description no gas supply / off position Description minimum gas supply ignition position / maximum gas supply DAILY USE WARNING! Refer to Safety chapters. BURNER OVERVIEW $ % & ' A. B. C. D. Burner cap Burner crown Ignition candle Thermocouple IGNITION OF THE BURNER Always light the burner before you put on the cookware. WARNING! Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse.
TURNING THE BURNER OFF To put the flame out, turn the knob to the off position . WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. HINTS AND TIPS WARNING! Refer to Safety chapters. COOKWARE CAUTION! Do not use cast iron pans, clay or earthenware pots, grill or toaster plates. WARNING! Do not put the same pan on two burners. CAUTION! Make sure that the pots are placed centrally on the burner in order to get the maximum stability and a lower gas consumption.
4. For the burner to operate correctly, make sure that the arms of the pan supports are inserted in the recesses of the enamelled plates. REMOVING AND ASSEMBLING PAN SUPPORTS After cleaning of the hob, make sure that pan supports are in a correct position. In order to place a pan support properly, make sure that its arms fits the cut-outs placed at the base of the burner as shown in the picture. This way, a pan support is stable and fixed. • • dirt can cause damage to the hob. Take care to avoid burns.
IF YOU CANNOT FIND A SOLUTION... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. A The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet.
OTHER TECHNICAL DATA TOTAL POWER: Gas original: G20 (2H) 20 mbar 7,65 kW Gas replacement: G30 (3+) 28-30 mbar 553 g/h G31 (3+) 37 mbar 543 g/h Electric supply: 220-240 V ~ 50-60 Hz 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse Appliance category: II2H3+ Gas connection: R 1/2" Appliance class: 3 GAS BURNERS FOR NATURAL GAS G20 20 mbar BURNER NORMAL POWER kW MINIMUM POWER kW INJECTOR MARK Rapid 2,95 0,75 119o Semi-rapid 1,85 0,6 92 Auxiliary 1,0
ENERGY EFFICIENCY PRODUCT INFORMATION ACCORDING TO EU 66/2014 Model identification ZGO68410BA Type of hob Built-in hob Number of gas burners 4 Energy efficiency per gas burner (EE gas burner) Left rear - Rapid 63.5% Right rear - Semi-rapid 65.4% Left front - Auxiliary not applicable Right front - Semi-rapid 63.2% Energy efficiency for the gas hob (EE gas hob) 64.
867356195-C-252019 WWW.ZANUSSI.