FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website to: get tips, download our leaflets, resolve possible malfunctions, obtain information on customer care. www.aeg.com register your product and receive a better service: www.aeg.
EN CONTENTS Cleaning the drip tray.....................................................15 Cleaning the water tank..................................................16 Cleaning the spouts........................................................16 Cleaning the pre-ground coffee funnel...........................16 Cleaning the inside of the coffee maker..........................16 Cleaning the brewing unit..............................................16 Cleaning the milk container...............................
EN INTRODUCTION N.B.! This symbol identifies important advice or information for the user. Symbols used in these instructions Important warnings are identified by these symbols. It is vital to respect these warnings. Failure to observe the instructions could result in electric shock, serious injury, burns, fire or damage to the appliance. Letters in brackets The letters in brackets refer to the legend in the Description of the Appliance on page 3.
EN stand the hazard involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of the reach of children aged less than 8 years. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
EN medium cup, large cup, mug) B6. ESC icon to exit the selected mode B7-B8. icons to scroll forwards or backwards through the menu and display the various modes B9. OK icon to confirm the selected function B10. icon to deliver a cup of coffee B11. icon to deliver two cups of coffee B12. icon to deliver cappuccino B13. icon to deliver hot water B14. “jug” icon to make a number of cups of coffee directly in the jug (provided) N.B.! The appliance has a cooling fan.
EN bottom of the appliance. Connect the appliance to an efficiently earthed and correctly installed socket with a minimum current rating of 10A only. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional.To comply with safety directives, an omnipolar switch with a minimum contact distance of 3 mm must be installed. Do not use multiple sockets or extensions. water comes out of the spout. 5.
EN (fig. 8) a number of times. The required coffee taste is displayed. 2. Place 1 cup under the spouts to make 1 coffee (fig. 9) or 2 cups for 2 coffees (fig. 9). Lower the spouts as near as possible to the cup for a creamier coffee (fig. 10). 3. Press the (B5) icon (B5) (fig. 11) to select the type of coffee: espresso, small cup, medium cup, large cup, mug. Now press the (icon (B10) (fig. 12) if you want to make a coffee and the icon (B11) (fig. 13) if you want to make 2 coffees.
EN To change the quantity, proceed as follows: • Press the icon (B2) to enter the menu (fig. 15). Press the icons (B7) and (B8) (fig. 2) until “PROGRAM COFFEE” is displayed. • Press the OK icon (B9). • Select the type of coffee you want to change by pressing the icons (B7) and (B8). • Press the OK icon (B9) to confirm the type of coffee you want to make. • Use the icons (B7) and (B8) to change the quantity of coffee. The progress bar shows the quantity of coffee selected.
EN • • • • Select the required quantity of water by pressing the icons (B7) and (B8). The progress bar shows the quantity of water selected. Press the OK icon (B9) to confirm (or the ESC icon (B6) to cancel the operation. Press the ESC (B6) icon (B6) (fig. 18) twice to exit the menu. The appliance is now reprogrammed with the new settings and is ready. • • The appliance delivers coffee. The cappuccino is now ready. Sweeten to taste and, if desired, sprinkle the froth with a little cocoa powder.
EN • • milk selected. Press the OK icon (B9) to confirm (or the ESC icon (B6) to cancel the operation. Press the ESC (B6) icon (B6) (fig. 18) twice to exit the menu. • • Changing the quantity of coffee • • • • • • Press the (B2) icon (B2) to enter the menu (fig. 15), then press the icons (B7) and (B8) (fig. 2) until “PROGRAM CAPPUCCINO” is displayed. Press the OK icon (B9) to confirm then the icons (B7 and (B8) (fig. 2) until “COFFEE FOR CAPPUCC.” is displayed. Press the OK icon (B9) again.
EN • • • • • • • • • • • • • To clean: • open the service door on the front of the appliance (fig. 16), extract the drip tray (fig. 17) and clean. • Clean the waste coffee container thoroughly. Press the icon (B2) to enter the menu. Press the icons (B7) and (B8) until “PROGRAM JUG” is displayed. Press the OK icon (B9) and then the icons (B7) and (B8) until “JUG COFFEE TASTE” is displayed. Press the OK icon (B9).
EN Cleaning the inside of the coffee maker 1. Check regularly (about once a week) that the inside of the appliance is not dirty. If necessary, remove coffee deposits with a sponge. 2. Remove the residues with a vacuum cleaner (fig. 30). 7. Once inserted, make sure the two red buttons have snapped out. Cleaning the brewing unit The brewing unit must be cleaned at least once a month. Important! The brewing unit (A5) must not be removed when the appliance is on. Do not use force to remove the brewing unit.
EN • Hole • • Hole 3. Remove the frothed milk regulator by pulling it outwards. 4. Wash all the components thoroughly with hot water and mild washing-up liquid. Make sure there are no milk residues left inside the holes and the groove on the fine end of the frothed milk regulator. 5. Check that the intake tube and spout are not clogged with milk residues. 6. Replace the frothed milk regulator, milk spout and intake tube. 7. Replace the milk container lid. • • Press the icon (B2) to enter the menu.
EN • Setting water hardness Press the ESC icon (B6) to exit. The operating period can be extended if required, making descaling less frequent by programming the machine on the basis of the real lime content in the water used. Proceed as follows: • remove the “Total Hardness Test” strip (attached to page 2) from its packaging then dip it fully in the water for a few seconds, Then remove and wait about 30 seconds (until it changes colour and forms red squares).
EN Resetting default values (reset) N.B.: Use the descaler recommended by the manufacturer only. Use of other descalers invalidates the guarantee. Failure to descale the appliance as described also invalidates the guarantee. If you change the original values, the default values can be reset as follows: • Press the icon (B2) to enter the menu and then the icons (B7) and (B8) until “RESET TO DEFAULT” is displayed. • Press the OK icon (B9) and the appliance displays “RESET TO DEFAULT PLEASE CONFIRM”.
EN • • Press the OK icon (B9) to confirm. Press the ESC (B6) icon (B6) once to exit the function or twice to exit the menu. TURNING THE APPLIANCE OFF Each time the appliance is turned off, it performs an automatic rinse cycle which cannot be interrupted. Danger of burns! During rinsing, a little hot water flows from the coffee spouts. Avoid contact with splashes of water. To turn the appliance off, press the ON/OFF button (A7). The appliance performs the rinse cycle then goes off. N.B.
EN DISPLAYED MESSAGES DISPLAYED MESSAGE FILL TANK! POSSIBLE CAUSE REMEDY The water tank is empty or positioned Fill the tank with water and/or insert it correctly, incorrectly. pushing it as far as it will go. GROUND TOO FINE ADJUST MILL AND The grinding is too fine and the coffee Turn the grinding adjustment knob one click alternating with PRESS OK is delivered too slowly. clockwise towards “7”.
EN TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. PROBLEM The coffee is not hot POSSIBLE CAUSE The cups were not preheated. REMEDY Warm the cups by rinsing them with hot water. The brewing unit has cooled down be- Before making coffee, preheat the brewcause 2/3 minutes have elapsed since the ing unit by selecting the RINSING funclast coffee was made. tion in the menu.
EN PROBLEM POSSIBLE CAUSE REMEDY The milk does not come out of the milk The intake tube is not inserted or is in- Insert the intake tube (C4) in the rubber spout (C5). serted incorrectly. washer in the milk container lid (fig. 24). The milk is not well frothed. The milk container lid is dirty. Clean the milk container lid as described in the section “Cleaning the milk container”. The frothed milk regulator is not positio- Adjust following the instructions in the ned correctly.
