User manual

ManualsBrandsZanussi ManualsDomestic AppliancesZGF96XK

MANUFACTURER:

ELECTROLUX ZANUSSI S.p.A.

Viale Bologna 298 - 47100 FORLI (Italy)

These warnings are provided in the interest of safety. You MUST read them carefully before installing

or using the appliance. It is most important that this instruction book should be retained with the

appliance for future reference. Should the appliance be sold or transferred, always ensure that the book

is left with the appliance in order that the new owner can get to know the functions of the appliance and

the relevant warnings.

For Your Safety

Cleaning and Manteinance

 For hygiene and safety reasons, this appliance should

be kept clean at all times. A build-up of fats or other

foodstuff could result in a fire.

 Disconnect the appliance from the electrical supply,

before carrying out any cleaning or manteinance work.

Technical assistance

 Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by

unexperienced persons may cause injury or serious

malfunctioning. Refer to your local Service Centre.

Always insist on genuine spare parts.

Environmental Information

 After installation, please dispose of the packaging

with due regard to safety and the environment.

 When disposing of an old appliance, make it unusable,

by cutting off the cable.

These instructions are only for the countries

stated by the symbol printed on the front cover

of this instruction book.

Guide to Use the instructions

The following symbols will be found in the text to guide you

throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

ENGLISH

Installation

 It is mandatory that all operations required for the

installation are carried out by a qualified or competent

person, in accordance with existing rules and

regulations.

 It is dangerous to alter the specification in any way.

 Using a gas cooking appliance will produce heat

and moisture in the room which it has been

installed in. Ensure a continuous air supply,

keeping the air vents in good conditions or

installing a cooker hood with discharge tube.

 In case of intensive or long time use of the

appliance, make the ventilation more efficient,

by opening a window or increasing the electric

exhaust fan power.

 Once you removed all packaging from the appliance,

ensure that it is not damaged and the electric cable is

in perfect conditions. Otherwise, contact your dealer

before proceeding with the installation.

 Ensure that the gas supply complies with the gas type

stated on the identification label, placed near the gas

supply pipe.

 Ensure a good ventilation around the appliance. A

poor air supply could cause lack of oxygen.

 The manufacturer disclaims any responsability

should all the safety measures not be carried out.

During Operation

 This appliance has been designed for cooking edible

foodstuff and to be used for domestic non-professional

purposes only. It must not be used for any other

purpose.

 Ensure that all control knobs are in the OFF position

when not in use.

 Should you connect any electrical tool to a plug near

this cooking appliance, ensure that electric cables are

not in contact with it and keep them far enough from

the heated parts of this appliance.

 If the appliance is out of order, disconnect it from the

electric supply.

Child safety

 This appliance has been designed to be operated by

adults and children under supervision. Young children

MUST NOT be allowed to tamper with the controls or play

near or with the oven.

 Accessible parts of this appliance may become hot

when it is in use. Children should be kept away until

it has cooled.

Summary of content (9 pages)

PAGE 1
ENGLISH For Your Safety These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
PAGE 2
Contents For the user For the installer For Your Safety 12 Technical Data 15 Instruction for the User 13 Instruction for the Installer 15 Cleaning and Maintenance 14 Electrical Connection 16 Adaptation to different types of gas 17 Building in 18 Instruction for the User Hob burners control knobs The hob burners control knobs are situated on the hob lateral panel.
PAGE 3
Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners. Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. If the marks are particularly difficult to remove, use common non-abrasive cleaners or specific products. Never use steel wool pads or acids.
PAGE 4
Technical Data Gas Burners Rating Rapid Burner Semirapid Burner Auxiliary Burner Fish kettle burner 3 kW (Natural Gas) / 2,8 kW LPG 2 kW 1 kW 3 kW (Natural Gas) / 2,8 kW LPG Category Setting Electric Supply Hob recess dimensions Length Width 830 mm. 480 mm. II2H3+ Natural Gas 20 mbar 220 V 60 Hz Instruction for the Installer l l l l The following instructions about installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force.
PAGE 5
Electrical Connection The appliance is designed to be connected to 220 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force.
PAGE 6
Adaptation to different types of gas Replacement of injectors Remove the pan supports. Remove the burner's caps and crowns. With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table on the next page). With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2): Reassemble the parts, following the same procedure backwards.
PAGE 7
Building in SR A SR 480 R 86 0 51 0 30 55 m in. P 830 150 min Fig. 9 FO 2349 Fig. 10 A = Auxiliary burner SR = Semirapid burner R = Rapid Burner P = Fish kettle These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig.9. Installation and assembly These hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig. 10.
PAGE 8
Fig. 14 Fig. 13 a 60 591 Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 13. The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is needed.
PAGE 9
35674-7501 01/01 Grafiche MDM - Forlì