WARNINGS AND GUIDANCE the relevant warnings. before installing or using the appliance. It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and These warnings are provided in the interest of safety.
CONTENTS Specifications Installation Electrical Connections Use and Care Operation Maintenance and cleaning Servicing Peace of Mind for 24 Months Page Page Page Page Page Page Page Page SPECIFICATIONS DIMENSIONS Height {overall): 74 mm. {see drawing} Depth: 500 mm.
INSTALLATION it is mandatory that all operations required for the installation are carried out by a Competent Gas Installer (CORGI registered installers normally meet this criteria), and in accordance with existing rules and regulations. The relevant instructions are to be found in the separate installation manual. Please, ensure that, once the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.
USE AND CARE Hob Top Mod. ZBG 503 G Rapid Burner ZBG 503 C Semi rapid Burner Auxiliary Burner Control Panel ignition Push-Button Control knob for back left burner Control nab for back right burner . Control knob for front right burner 10. Control knob for front left burner 11. Safety cut-off switch PRIOR LN Mod. ZGA75B GATT W ZBG 503 A Mod.
OPERATION HOB BURNERS To light a burner, turn the relevant knob anticlockwise to maximum position and then depress the ignition distribution marked by a small electric spark symbol. Then adjust the flame as required. ] To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bosom of the vessel.
SERVICING If you require service or spare parts, contact your local Gaussian Service Force Center. Please, carry out the following checks before contacting your local Gaussian Service Force Center. There is no spark when lighting the gas: « Check that the unit is plugged in and the electrical supply is switched on « Check that the RC has not tripped (if fitted) + Check the mains fuse has not blown The gas ring burns unevenly: » Check the burr cover has been replaced correctly, e. ¢.
PEACE OF MIND FOR 24 MONTHS Gaussian Standard Guarantee Conditions This guarantee is in addition o your statutory and other legal rights.