6 1
7
Fast Freeze function The appliance has a fast freeze function. This accelerates the freezing of fresh food, and at the same time protects foodstuffs already stored from undesirable warming. To activate the function, do these steps: 1. Press the button to the on position. 2. The Fast Freeze indicator light should now illuminate. To deactivate the function, do these steps: 1. Press the button to the off position. 2. The Fast Freeze indicator light goes out.
Sweep off the melting water with a dry cloth on each layer of evaporator,The melting water swept down gathers in the outlet channel which is situated in the bottom of the appliance and can be removed according to diagram below: Put an adequately high bowl or dish under the outlet. 4. When defrosting is completed,dry the interior thoroughly; keep the scraper for future use; 5. Replace the plug in the power socket; 6. After two or three hours,reload the previously removed food into the compartment.
Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized autotransformer must be used. The appliance must be earthed The power supply cable plug is provided with a contact for this purpose.
Fix the stopper in the middle of the condenser, rotate the stopper 90 degrees and fixed the position. 4. Remove the stopper which is under the bottom door trim with a screwdriver, then install it to the left symmetrical. 1 2 1.Door Stop 2.Door Stop Screw 5. Rotate the pin by using the wide-head of the spanner and remove the left hole cover with a screwdriver, exchange the assembly location and fix it as the previous method. 1. Tilt the refrigerator back to set at an angle. 2.
C0922.5.
