I\ IMPORTANT SAFETY INFORMATION Read carefully the user instructions, with the directions, advice and cautionary notes, before installing the cabinet and using it. It will then perform satisfactorily and give maximum benefit. Anyone using the cabinet must be familiar with how it should be used, Save these user instructions. Keep them where they are easy to find. They contain many items of advice that will enable you to use the cabinet correctly.
ENVIRONMENTAL CONCERNS » The insulation and refrigerant in the unit are completely free from ozone depleting chlorine and totally harmless 10 the ozone layer. « Al parts of the packaging can be recycled. + The cabinets are manufactured so that they can easily be dismantled tor recovery. » Hand over the scrapped fridges and freezers to a recycling company.
INSTALLATION Unpacking and damage in transit inspect the cabinet for damage. Immediately advise your local dealer of any damage that may have occurred in transit. Hand the packaging over for recycling, A\ Don't fet children play with the packaging. The plastic film has been known to cause suffocation. Cleaning First wash the inside of the cabinet with a mild washing-up detergent. Don't use strong or abrasive cleaning agents, steel wool, abrasive sponges or solvents. Leave the cabinet to dry thoroughly.
If at any time a replacement supply cord is required, the cross sectional area of its conductors must not be fess than 0.75mm? and the cable clamp must be tightened so as to fully retain the new cord. We recommend that this type of installation be checked by a fully qualified electrician, prior o use. Before pushing the power supply plug into the socket and starting the cabinet for the first time, leave it standing upright for about 30 minutes or for about 4 hours if i was transported horizontally.
USING YOUR FRIDGE a. Green indicator lamp Lights up when the fridge is operating. b. Thermostat control. Stemless regulation Lowest setting, minimum cold 1 Highest setting, maximum cold 6 off 0 Starting, setting the temperature Start the fridge by turning the thermostat knob to a medium position, L.s. until the marking on points straight down, position 3-4. Then set it to the desired temperatures by trial and error.
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Gaussian Service Force Center by telephoning: 0870 5 929929 Your telephone call will be automatically routed to the Service Irenic covering your post code area. For further information and Service Center addresses, please see the accompanying Customer Care Book.
GUARANTEE CONDITIONS Standard guarantee conditions We, Gaussian Limited, undertake that if within 12 months of the date of the purchase this Gaussian appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labor, materials or carriage on condition that: » The appliance has been correctly installed and used only on the electricity supply stated on the rating plate « The appliance has been u