User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
• • • • • • • • • • • • Do not let the electricity mains cable tangle. Make sure that a shock protection is installed. Use the strain relief clamp on the cable. Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug (if applicable) or to the mains cable.
products, abrasive cleaning pads, solvents or metal objects. DISPOSAL WARNING! Risk of injury or suffocation. • Contact your municipal authority for information on how to discard the appliance correctly. • • Disconnect the appliance from the mains supply. Cut off the mains electrical cable close to the appliance and dispose of it. SERVICE • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only.
Cookware made of enamelled steel and with aluminium or copper bottoms can cause the colour change on the glass-ceramic surface. Heat setting: EXAMPLES OF COOKING APPLICATIONS Heat setting: 1 Application: Keeping warm Application: 2 Gentle simmering 3 Simmering 4 Frying / browning 5 Bringing to the boil 6 Bringing to the boil / quick frying / deep-frying CARE AND CLEANING WARNING! Refer to Safety chapters. GENERAL INFORMATION • Clean the hob after each use.
IF YOU CANNOT FIND A SOLUTION... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface). Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of A charge, also during the warranty period.
BUILDING IN min. 28 mm R 5mm min. 55mm 490+1mm 270+1mm min. 12 mm A min. 20 mm Place the sealing gasket A all around the edge of the cut out. INSTALLATION OF MORE THAN ONE HOB Fit the hob in the cut out and push it down until comes in contact with the kitchen top surface. then remove the excess sealing. min.
TECHNICAL DATA COOKING ZONES SPECIFICATION Cooking zone Nominal Power (Max heat setting) [W] Cooking zone diameter [mm] Middle front 1200 145 Middle rear 1700 180 For optimal cooking results use cookware not larger than the diameter of the cooking zone.
867333052-B-082017 WWW.ZANUSSI.