Operation Manual

25
Contents
This appliance complies with the following
E.E.C. Directives:
- 73/23 - 90/683 (Low Voltage Directive);
- 89/336 (Electromagnetical Compatibility Directive);
- 93/68 (General Directives)
and subsequent modifications.
MANUFACTURER:ELECTROLUX ZANUSSI S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italie)
For the User
For the Installer
Instruction for the User
Use of electric plates
To switch on the plates, turn the relevant knob to the
required position.
Pilot lamp
The pilot light signals the connection of the electric
plate.
Electric plate with 7 position
knob
The plates are regulated by a 7 position switch:
Position 0: off
Position 1: minimum disbursement of heat
Position 6: maximum disbursement of heat
In the intermediate positions, 2-3-4-5, increasing power
values are obtained.
When cooking with fats or oils maximum
care must be taken as these can self-ignite
when over-heated.
Normal and rapid plates: For best results we
advise you to initially regulate the switch to
“rapid” to accelerate the heating of the plate and
then turn the switch to the position most suitable
for the food to be cooked.
Very low 1 To keep food hot. To melt
butter or chocolate.
Low 2 For the preparation of
sauces, casseroles,
puddings, fried eggs.
Moderate 3 For vegetable soups. To
thaw food, boil water or milk.
Medium 4 For potatoes, fresh
vegetables, pasta, minestro-
ne, stocks, doughnuts, fish.
High 5 Omelettes, steak, pancakes.
Very high 6 Steak, meat in breadcrumbs,
fried food.
Important Safety Information 24
Instruction for the User 25
Hints and tips 26
Cleaning and maintenance 26
Instruction for the Installer 27
Electrical connection 29