Operation Manual

27
Technical Data
1) Normal hot plate 180 mm Ø 1,5 kW
2) Normal hot plate 145 mm Ø 1,0 kW
3) Rapid hot plate 180 mm Ø 2,0 kW
4) Rapid hot plate 145 mm Ø 1,5 kW
Total energy 6,0 kW
Voltage 230 V - 50 Hz
Hob recess dimensions
Length 550 mm.
Width 470 mm.
Instruction for the Installer
500
580
231
4
Insertion and assembly
The hobs can be installed in a kitchen unit with an
opening for insertion of the dimensions illustrated in
Fig. 2.
The appliance is of type X and has been designed to
be built into or fitted next to the unit according to the
regulations in force (I.E.C. 335.2.6). The side walls of
the unit must not exceed the height of the hob. Avoid
installing the appliance in the proximity of inflammable
materials (e.g. curtains, tea towels, etc.).
The fixture of the hob to the unit must be carried
out as follows:
 Position the relevant sealings, supplied, on the
edge of the opening predisposed for installation,
taking care that the edges meet without
overlapping;
 Install the hob in the opening of the unit taking care
in centring.
 Fix the hob with the appropriate clips (Fig. 3).
The edge of the hob forms a double labyrinth seal
which provides a total guarantee against the infiltration
of liquids.
Fig. 3
a) Seal
FO 0199
a
550
470
55 min.
30
FO 2098
Fig. 2