User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance.
• • The bottom of the appliance can get hot. Make sure to install a separation panel made from plywood, kitchen carcass material or other nonflammable materials under the appliance to prevent access to the bottom. Make sure that the ventilation space of 2 mm, between the worktop and the front of the below unit, is free. The warranty does not cover damages caused by the lack of an adequate ventilation space. ELECTRICAL CONNECTION WARNING! Risk of fire and electric shock.
• • • • • • Do not let cookware to boil dry. Be careful not to let objects or cookware fall on the appliance. The surface can be damaged. Do not activate the cooking zones with empty cookware or without cookware. Do not put aluminium foil on the appliance. Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. This appliance is for cooking purposes only.
ASSEMBLY min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
min. 12 mm min. 2 mm PROTECTION BOX If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven.
CONTROL PANEL LAYOUT 1 2 3 4 5 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / Child Safety Device To lock / unlock the control panel. 3 - To select the cooking zone. Heat setting display To show the heat setting. - To set a heat setting. - 4 / 5 HEAT SETTING DISPLAYS Display Description The cooking zone is deactivated.
RESIDUAL HEAT INDICATOR WARNING! There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using. The indicators may also come on for the neighbouring cooking zones even if you are not using them. The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. DAILY USE WARNING! Refer to Safety chapters.
Set the heat setting first. To activate the function: touch for 4 seconds. . To deactivate the function: touch previous heat setting comes on. comes on . The When you deactivate the hob, you also deactivate this function. CHILD SAFETY DEVICE This function prevents an accidental operation of the hob. To activate the function: activate the hob with . Do not set the heat setting. Touch seconds. POWER MANAGEMENT • Cooking zones are grouped according to the location and number of the phases in the hob.
THE NOISES DURING OPERATION If you can hear: • crack noise: cookware is made of different materials (a sandwich construction). • whistle sound: you use a cooking zone with a high power level and the cookware is made of different materials (a sandwich construction). • humming: you use a high power level. • clicking: electric switching occurs. • hissing, buzzing: the fan operates. The noises are normal and do not indicate any malfunction.
• • • Scratches or dark stains on the surface have no effect on how the hob operates. Use a special cleaner suitable for the surface of the hob. Use a special scraper for the glass. CLEANING THE HOB • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the • • glass surface at an acute angle and move the blade on the surface.
Problem Possible cause The sensor fields become hot. The cookware is too large or you put it too near to the controls. Put large cookware on the rear zones if possible. comes on. Automatic Switch Off operates. Deactivate the hob and activate it again. comes on. Child Safety Device or Lock operates. Refer to "Daily use". comes on. There is no cookware on the zone. Put cookware on the zone. The cookware is unsuitable. Use suitable cookware. Refer to "Hints and tips".
COOKING ZONES SPECIFICATION Cooking zone Nominal power (maximum heat setting) [W] PowerBoost [W] PowerBoost maxiCookware diamemum duration ter [mm] [min] Left front 2300 2800 10 180 - 210 Left rear 1200 - - 125 - 145 Right front 1200 1800 4 125 - 145 Right rear 1800 - - 145 - 180 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
ENVIRONMENTAL CONCERNS with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances.
867349319-A-212018 WWW.ZANUSSI.