EN User manual Hob ZEI6740BBA
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 5 6 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation instructions _ _ _ _ _ _ _ _ _ _ _ 11 Technical information _ _ _ _ _ _ _ _ _ _ _ _ 14 Environment concerns _ _ _ _ _ _ _ _ _ _ _ 14 Subject to
• Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. • Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. • Do not store items on the cooking surfaces. • Do not use a steam cleaner to clean the appliance. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. • Make sure that a shock protection is installed. • Use the strain relief clamp on cable. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact the Service or an electrician to change a damaged mains cable.
abrasive products, abrasive cleaning pads, solvents or metal objects. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. Disposal Warning! Risk of injury or suffocation. • Contact your municipal authority for information on how to discard the appliance correctly.
Sensor field 2 A heat setting display Function To show the heat setting. 3 To activate the Power function. 4 Timer indicators of cooking zones To show for which cooking zone you set the time. 5 The timer display To show the time in minutes. 6 A control bar To set a heat setting. 7 To increase or decrease the time. / 8 To set a cooking zone. Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - Power function operates.
• The relation between heat setting and times of the Automatic Switch Off function: • , — 6 hours • - • — 4 hours • - — 5 hours — 1.5 hours The heat setting Touch the control bar at the heat setting. Move your finger along the control bar to change the setting. Do not release before you have a correct heat setting. The display shows the heat setting. Power function The Power function makes more power available to the induction cooking zones.
The Child Safety Device This function prevents an accidental operation of the appliance. To activate The Child Safety Device • Activate the appliance with . Do not set the heat settings. • Touch for 4 seconds. The symbol comes on. • Deactivate the appliance with . To deactivate The Child Safety Device • Activate the appliance with . Do not set the heat settings. Touch for 4 seconds. comes on. The symbol • Deactivate the appliance with .
zone. For the minimum diameters see the Technical Information chapter. The Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase the heat setting it is not proportional to the increase of the cooking zone consumption of power. Hea t setting Use to: It means that the cooking zone with the medium heat setting uses less than a half of its power. The data in the table is for guidance only.
Scratches or dark stains on the glass-ceramic cause no effect on how the appliance operates. To remove the dirt: 1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface . 2. 3. – Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations.
Problem and a number come on. comes on. Possible cause Remedy There is an error in the appliance. Disconnect the appliance from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect it again. If comes on again, speak to the service centre. There is an error in the appliance because a cookware boils dry. The overheating protection for the cooking zones and the Automatic Switch Off operate. Deactivate the appliance. Remove the hot cookware.
Assembly min. 500mm min. 50mm min. 2mm B A min. 2 mm min. 500 mm min 30 mm < 20 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm B A min. 500 mm min. 2 mm > 20 mm A 12 mm 28 mm 38 mm 12 B 57 mm 41 mm 31 mm www.zanussi.
min. 12 mm min. 2 mm R 5mm 55mm 490+1mm 560+1mm min. 38 mm www.zanussi.
If you use a protection box (an additional accessory1)), the front airflow space of 2 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. 1) The protection box accessory may not be available in some countries. Please contact your local supplier. Technical information Model ZEI6740BBA Prod.Nr. 949 595 538 00 Typ 58 GAD D5 AU 220-240 V 50-60 Hz Induction 7.4 kW Made in Germany Ser.Nr. .......... 7.
household waste disposal service or the shop where you purchased the product. Packaging material plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the waste disposal facilities in your municipality. The packaging materials are friendly to the environment and can be recycled. The www.zanussi.
892955051-A-292012 www.zanussi.
