EN User Manual Hob ZEI6740BBA
Contents Safety information Safety instructions Product description Daily use Hints and tips 2 3 5 6 8 Care and cleaning Troubleshooting Installation Technical information 10 10 12 14 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
• • • • • • • • Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance.
• • • • • • • • • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact an Authorised Service Centre or an electrician to change a damaged mains cable.
• • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Disposal • Contact your municipal authority for information on how to discard the appliance correctly. Disconnect the appliance from the mains supply. Cut off the mains cable and discard it. WARNING! Risk of injury or suffocation.
Sensor field Function Comment ON / OFF To activate and deactivate the hob. Heat setting display To show the heat setting. Power function To activate and deactivate the function. - Timer indicators of cooking zones To show for which zone you set the time. 5 - Timer display To show the time in minutes. 6 - Control bar To set a heat setting. 7 / - To increase or decrease the time. - To select the cooking zone.
Automatic Switch Off The function deactivates the hob automatically if: • • • • • • All cooking zones are deactivated. You do not set the heat setting after you activate the hob. You spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. The hob gets too hot (e.g. when, a saucepan boils dry). Let the cooking zone cool down before you use the hob again.
• The function has no effect on the operation of the cooking zones. • The Child Safety Device This function prevents an accidental operation of the hob. To activate the function: activate the hob with • . Do not set the heat setting. Touch of the timer for 4 seconds. Deactivate the hob with comes on. • . The function divides the power between cooking zones connected to the same phase.
smaller diameter than the minimum receives only a part of the power generated by the cooking zone. Refer to “Technical information” chapter. Energy saving • • • The noises during operation If it is possible, always put the lids on the cookware. Put cookware on a cooking zone before you start it. Use the residual heat to keep the food warm or to melt it. If you can hear: Examples of cooking applications • The relation between the heat setting and the cooking zone consumption of power is not linear.
Heat setting Use to: Time (min) Hints Boil large quantities of water. Power function is activated. Care and cleaning WARNING! Refer to Safety chapters. General information • • • Clean the hob after each use. Always use cookware with clean bottom. Scratches or dark stains on the surface have no effect on how the hob operates. Use a special cleaner applicable for the surface of the hob. Use a special scraper for the glass. • • • dirt can cause damage to the hob.
Problem Possible cause Remedy An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated. You put something on one or more sensor fields. Remove the object from the sensor fields. The hob deactivates. You put something on the sensor Remove the object from the sensor field. field . Residual heat indicator does not come on. The zone is not hot because it operated only for a short time.
If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
A A min. 2 mm B min. 2 mm B > 20 mm < 20 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min 30 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
min. 12 mm min. 2 mm Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. Technical information Rating plate Modell ZEI6740BBA Typ 58 GAD D5 AU Induction 7.4 kW Ser.Nr. .................
Cooking zones specification Cooking zone Nominal power (maximum heat setting) [W] Power function [W] Power function maximum duration [min] Cookware diameter [mm] Left front 2300 3600 10 180 - 210 Left rear 1800 2500 10 145 - 180 Right front 1400 1800 10 125 - 145 Right rear 1800 2500 10 145 - 180 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
867301812-A-162014 www.zanussi.
