EN User manual Dishwasher ZDTS 102
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of detergent and rinse aid _ _ _ _ _ _ _ _ _ _ _ _ 2 4 6 7 7 8 9 Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ _ Select and start a washing programme _ _ _ _ _ _ _ Car
Care and cleaning • Before you clean the appliance, deactivate it and disconnect the mains plug from the mains socket. • Do not use flammable products or products that can cause corrosion. • Do not use the appliance without the filters. Make sure that the installation of the filters is correct. An incorrect installation causes unsatisfactory washing results and damage to the appliance. • Do not use spray water or steam to clean the appliance. Risk of electrical shock and damage to the appliance.
Service centre • If an accident occurs with these detergents, contact immediately a physician. • If the detergent gets into the mouth, contact immediately a physician. • If the detergent gets into the eyes, contact immediately a physician and clean the eyes with water. • Keep dishwasher detergents in a safe area and out of children touch. • Do not keep the appliance door open when there is detergent in the detergent dispenser. • Fill the detergent dispenser only before you start a washing programme.
Indicators Salt indicator. It comes on when it is necessary to fill the salt container. 1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. 1) When the salt container is empty, the related indicator does not come on while a washing programme operates. On/off button Acoustic signals Press this button to activate or deactivate the appliance.
Washing programmes Programme Degree of soil Type of load Programme description Heavy soil Crockery, cutlery, pots and pans Prewash Main wash 70 °C 2 middle rinses Last rinse Dry Normal soil Crockery and cutlery Prewash Main wash 65 °C 2 middle rinses Last rinse Dry Normal or light soil Crockery and cutlery Main wash 65 °C Rinse Normal soil Crockery and cutlery Prewash Main wash 50 °C 1 middle rinse Last rinse Dry Intensive Normal Quick 1) Economy 2) This programme gives dishes a quick ri
The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance 1. Be sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. 2. Fill the salt container with dishwasher salt. 3. Fill the rinse aid dispenser with rinse aid. 4. Load cutlery and dishes into the appliance. 5. Set the correct washing programme for the type of load and soil. 6.
Manual adjustment 1 2 Turn the water hardness dial to the position 1 or 2 (refer to the table). 4. When the programme indicator (B) goes off and the end indicator starts to flash, press the programme button. The programme indicator (A) continues to flash. The electronic adjustment of the water softener is activated. 5. The end indicator shows the setting of the water softener.
Use of detergent and rinse aid 1 3 2 4 30 4 MA X + 3 2 - 1 20 5 To fill the rinse aid dispenser: 1. Press the release button 7 to open the lid 6 . 2. Fill the rinse aid dispenser 3 with rinse aid. The mark 'max.' shows the maximum level. 3. Remove the spilled rinse aid with an absorbent cloth to prevent foam during the washing programme. 4. Close the lid until it locks into position. Fill the rinse aid dispenser when the lens 5 is transparent.
Loading cutlery and dishes Hints and tips • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove the remaining food from the items. • Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that water does not collect in containers or in bowls. • Make sure that cutlery and dishes do not bond together. • Make sure that the glasses do not touch other glasses.
Do these steps to move the upper basket to the higher position: 1. Move the front runner stops (A) out. 2. Pull the basket out. 3. Put the basket in the higher or lower position. 4. Put back the front runner stops (A) in their initial position. 1 2 Caution! If the basket is in the higher position, do not put cups on the cup racks. Select and start a washing programme Starting the washing programme 1. Activate the appliance. Make sure that the appliance is in setting mode. 2.
1 2 Clean the filters below running water. 5 Put the flat filter A in the bottom of the appliance. Install the flat filter correctly under the two guides D. 6 Put the filter system in position. To lock the filter system, turn the handle clockwise until it locks in position. To clean the spray arms Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a thin pointed object.
Malfunction Possible cause The appliance does not fill with water. The water tap is blocked or there is limescale on it. The appliance does not drain the water. Clean the water tap. The water pressure is too low. Contact your local water authority. The water tap is closed. Open the water tap. The filter in the water inlet hose is blocked. Clean the filter. The connection of the water inlet hose is not correct. Make sure that the connection is correct. The water inlet hose is damaged.
Problem Possible cause Possible solution The spray arms could not turn freely because of incorrect arrangement of the load. Make sure that an incorrect arrangement of the load does not cause a blockage of the spray arms. The filters are dirty or not assembled and installed correctly. Make sure that the filters are clean and correctly assembled and installed. The quantity of detergent was not sufficient or missing. Make sure that the quantity of detergent is sufficient. The salt container is empty.
Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
117950481-A-502010 www.zanussi.