User manual

Programme
Degree of soil
Type of load
Programme phases
Consumption values
1)
Duration
(min)
Energy
(kWh)
Water
(l)
3)
Fresh soil
Crockery and
cutlery
Wash 60 °C
or 65 °C
Rinses
30 0.8 10
4)
All Pre-wash 14 0.1 5
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (Also, it is a standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short period
of time.
4) Use this programme to quickly rinse the dishes and to prevent the food remains from drying out on the
dishes and to reduce bad odour coming out from the appliance. Do not use detergent with this pro-
gramme.
SETTINGS
PROGRAMME SELECTION MODE
The appliance is in programme selection mode when the programme indicator flashes.
After activation, the appliance is in programme selection mode by default . If not, set the programme
selection mode the following way:
1. Press and hold the programme button for 3 seconds.
CANCEL FUNCTION
Press the programme button until the appliance is in programme selection mode.
With this function you can cancel the running programme or the delay start.
USER MODE
While the appliance is in programme selection mode:
1. Press and hold the programme button until the indicator flashes, and the indicators and
are on.
Settings available in the user mode:
The level of the water softener according to the water hardness.
6