DISHWASHER ZDT 6252 COP04 152975 48/0 INSTRUCTION BOOK UK
Description of the appliance 1. Levelling spacers 2. Upper basket stop 3. Upper spray arm 4. Salt container 5. Large filter 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 1 2 3 13 12 4 11 5 10 10. Central filter 6 11. Lower spray arm 9 12. Upper basket 13. "SID" detergent dispenser (Super Intensity Dispenser) 8 7 IN84 The control panel In this fully integrated appliance the controls are located on the top of the door.
Washing programmes Programme Type of load and degree of soil Required push buttons RINSE AND HOLD Any. Partial load (to be completed later in the day) On/Off + RINSE AND HOLD INTENSIVE 70°c Heavy soil. Crockery, cutlery, pots and pans On/Off + INTENSIVE 70°c Recommended quantity of detergent wash prewash / / 20 g 10 g 5g Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Cold prewash Main wash up to 50°C 1 cold rinse 1 hot rinse Drying Normal soil.
Operating sequence 1. Check the filters 10. Switch off the dishwasher Ensure they are clean and properly positioned (see "Maintenance and cleaning"). Open the door and switch off the dishwasher by pressing the On/Off push button. Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. 2.
Using your appliance Loading your appliance The upper basket Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Do not load very small items which can fall through the baskets. Arrange items so that water can reach all surfaces.
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.
Instruction Book DISHWASHER - Before use - Maintenance - Installation Contents Before use Setting the water softener Filling with salt Filling with rinse aid and adjusting the dose Use of detergent 2 2 2 3 3 External cleaning Prolonged periods of non-operation Frost precautions Moving the machine 5 5 5 5 Something not working 6 Hints and tips 4 Maintenance and cleaning Internal cleaning Cleaning the filters 5 5 5 Installation Water supply connections Water outlet connection Electrical connection
Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill the rinse aid dispenser. 6. Run a "Rinse and Hold" programme. SO322 2. Press the programme push button corresponding to the required level. 3.
Rinse aid Use of detergent Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets.
Hints and tips To save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash dishes under running water. For best washing and drying results Before loading, remove all scraps of food and soak very heavily soiled pots and pans.
Maintenance and cleaning The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine. Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems. In the case of alarm intervention the dishwasher will not start or stops during operation, all push buttons are inoperative except for the ON/OFF push button. All indicator lights are off except for the ON/OFF indicator light.
Installation Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain.
This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.