DISHWASHER ZDI 6041 COP04 152975 53/0 INSTRUCTION BOOK UK
Description of the appliance 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Large filter 11. Central filter 12. Upper spray arm 13. Upper basket IN80 The control panel 1. On/Off indicator light 2. On/Off push button 3. Programme guide 4. Door handle 5. Programme selector dial 6.
Washing programmes Programme * HEAVY SOIL 65°C NORMAL SOIL 65°C Type of load and degree of soil Starting position of the programme selector dial Required push button Recommended quantity of detergent wash prewash Heavy soil. Crockery, cutlery, pots and pans A On/Off 25 g 5g Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Drying Normal soil.
Using your appliance Loading your appliance The upper basket Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items so that water can reach all surfaces. Light items (plastic bowls etc.
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser Test standard: EN 50242 Reference programme: HEAVY SOIL 65°C Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage: 25 g in the dispenser 5 g on the dispenser lid Arrangement upper basket Arrangement lower basket Arrangement cutlery basket Technical specifications Dimensions Width Height Max depth Max depth with o
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.
Guarantee Conditions Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: ● The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.
Instruction Book DISHWASHER - Before use - Maintenance - Installation Contents Before use Setting the water softener Filling with salt Filling with rinse aid and adjusting the dose Use of detergent 2 2 2 3 3 External cleaning Prolonged periods of non-operation Frost precautions Moving the machine 5 5 5 5 Something not working 6 Hints and tips 4 Maintenance and cleaning Internal cleaning Cleaning the filters 5 5 5 Installation Water supply connections Water outlet connection Electrical connection
Before use Before using your dishwasher for the first time: Filling with salt Attention! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting a washing programme. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine, which may cause corrosion. 1.
Rinse aid Use of detergent Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets.
Hints and tips To save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash dishes under running water. For best washing and drying results Before loading, remove all scraps of food and soak very heavily soiled pots and pans.
Maintenance and cleaning The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine. Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.
Installation Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain.
This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
