EN User manual Dishwasher ZDF18001XA
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 4 5 5 7 Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Technical information _ _ _ _ _ _ _ _ _ _ _ 12 Environment concern
• The first time you use the appliance, make sure that there is no leakage. Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. Warning! Risk of injury, burns, electrical shock or fire. • Do not change the specification of this appliance.
Control panel 1 2 5 1 On/off button 2 Display 3 4 4 Delay button 5 Programme buttons 3 Indicators Indicators Description Multitab indicator. Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme operates. Programmes Programme 1) 2) 3) 4 Degree of soil Type of load Programme phases Duration (min) Energy (kWh) Water (l) Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry 195 0.91 9.
Programme 1) 4) 5) Degree of soil Type of load Programme phases Duration (min) Energy (kWh) Water (l) Fresh soil Crockery and cutlery Wash 60 °C Rinse 30 0.8 9 All Prewash 14 0.1 4 1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of dishes can change the values. 2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets. Adjusting the water softener Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Level 47 - 50 84 - 90 8.4. - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.
3 1 4 1 2 2 3 4 3 Put 1 litre of water in the salt container (only for the first time). Filling the rinse aid dispenser 4 To adjust the released quantity of rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). 2 1 1 2 Daily use 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”.
Starting a programme with delay start A 30 B 30 20 3 20 4 Put the detergent or the tablet in compartment (A) If the programme has a prewash phase, put a small quantity of detergent in compartment (B). Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance. The appliance is in setting mode when all the programme indicators come on and the display shows 2 horizontal status bars.
1. Press the on/off button to deactivate the appliance. 2. Close the water tap. If you do not press the on/off button, the Auto Off function automatically deactivates the appliance a few minutes after the end of the programme. This helps to decrease the energy consumption, • First remove the items from the lower basket, then from the upper basket. • There can be water on the sides and on the door of the appliance. Stainless steel becomes cool more quickly than the dishes.
• The spray arms are not clogged. • The position of the items in the baskets is correct. • The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used. • There is dishwasher salt and rinse aid (unless you use combi detergent tablets). • The cap of the salt container is tight. Care and cleaning Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
Internal cleaning If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. Troubleshooting The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem. With some problems, the display shows an alarm code: • - The appliance does not fill with water.
Stains and dry water drops on glasses and dishes • The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position. • The quality of the detergent can be the cause. Dishes are wet • The programme is without a drying phase or with a low temperature drying phase. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • The quality of the combi detergent tablets can be the cause.
Rating plate Mod. ... ... ... Prod. No. ... ... ... Ser. No. ... Environment concerns Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose www.zanussi.com appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
www.zanussi.
www.zanussi.
156967050-B-372013 www.zanussi.