Operation Manual

3
4
Put 1 litre of water in the salt container (only
for the first time).
Filling the rinse aid dispenser
1
2
1
2
1
2
3
4
3
2
1
4
To adjust the released quantity of rinse aid,
turn the selector between position 1 (lowest
quantity) and position 4 (highest quantity).
Daily use
1. Open the water tap.
2. Press the on/off button to activate the ap-
pliance. Make sure that the appliance is in
setting mode, refer to “Setting and starting
a programme”.
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent tablets,
activate the Multitab option.
5. Set and start the correct programme for
the type of load and the degree of soil.
Using the detergent
1
2
1
2
56
www.zanussi.com