User manual

Problem Possible solution

Make sure that the laundry does not catch be-

tween the appliance door and the rubber seal.

The appliance stops during operation. Make sure that the water container is empty.

Press Départ/Pause (Start/Pause) to start the

programme again.

The cycle time is too long or unsatisfactory dry-

ing result.

Make sure that the weight of the laundry is appli-

cable to the duration of the programme.

Make sure that the filter is clean.

The laundry is too wet. Spin the laundry in the

washing machine again.

Ensure that the room temperature is higher than

+5°C and lower than +35°C. Optimal room tem-

perature is 19°C to 24°C.

Set the Minuterie (Time Drying) or the Très Sec

(Extra Dry) programme.

The display shows Err. If you want to set a new programme, deactivate

and activate the appliance.

Make sure that the options are applicable to the

programme.

The display shows (e.g. E51). Deactivate and activate the appliance. Start a

new programme. If the problem occurs again,

contact the Service.

1) After maximum 5 hours, the programme ends automatically.

2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).

If the drying results are not satisfactory

• The set programme was incorrect.

• The filter is clogged.

• The condenser is clogged.

• There was too much laundry in the appliance.

• The drum is dirty.

• Incorrect setting of the conductivity sensor

( See chapter "Settings - Adjustment of the

remaining laundry moisture degree " for better

setting).

• The airflow slots are clogged.

• Room temperature is too low or too high

( optimal room temperature 19°C to 24°C )

TECHNICAL DATA

Height x Width x Depth 850 x 600 x 600 mm (maximal 665 mm)

Max. depth with the appliance door open 1090 mm

Max. width with the appliance door open 950 mm

Adjustable height 850 mm (+ 15 mm - feet regulation)

Drum volume 118 l