EN User manual Tumble Dryer ZDC 47209W
Contents Important safety information _ _ _ _ _ _ _ _ _ Environment _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Programme chart _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 4 7 7 8 Sorting and preparing laundry _ _ _ _ _ _ _ _ 9 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Cleaning and maintenance _ _ _ _ _ _ _ _ _ 11 What to do if ...
• If you have washed your laundry with stain remover you must execute an extra rinse cycle before loading your tumble dryer. • Please make sure that no gas lighters or matches have accidentally been left in pockets of garments incase they are loaded into appliance Warning! • Risk of fire! Never stop a tumble dry before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. • Lint must not be allowed to accumulate around the tumble dryer.
dren should be supervised to ensure that they do not play with the appliance. Warning! • Danger of suffocation! The packaging components (e.g. plastic film, polystyr- ene) can be dangerous to children Keep them out of children’s reach. • Keep all detergents in a safe place out of children’s reach. • Make sure that children or pets do not climb inside the drum. Environment The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
• To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface. • Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is. • The feet must never be removed. Do not restrict the floor clearance through deeppile carpets, strips of wood or similar. This might cause heat built-up which would interfere with the operation of the appliance.
1 Blue - Neutral 2 cord clamp 3 Brown - Live 4 Green and Yellow - Earth The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal «N» or coloured black. The wire coloured brown must be connected to the terminal marked «L» or coloured red.
1 6 7 1 Worktop 2 Rating Plate 3 Heat exchanger 4 Water reservoir 5 Heat exchanger door 6 Control panel 2 8 3 9 10 4 5 7 Fluff filters 8 Loading door 9 Ventilation grille 10 Adjustable feet Control panel 5 2 1 1 Programme knob and 2 Function buttons OFF switch 3 Start/Pause button 4 Delay Start button 5 Function status led – Delay Start lights – – – – – 4 3 Drying light End/Anti-crease light Condenser light Filter light Tank light Before first use In order to remove any residues which may
Additional functions/options Application/properties 7 kg DELICATE , ANTI-CREASE , BUZZER , DELAY START Thorough drying of thick or multi- layered fabrics, e.g. terry towelling items, bathrobes. COTTON STRONG DRY 7 kg DELICATE , ANTI-CREASE , BUZZER , DELAY START Thorough drying of thick or multi- layered fabrics, e.g. terry towelling items, bathrobes. COTTON CUPBOARD DRY 1) 7 kg DELICATE , ANTI-CREASE , BUZZER , DELAY START Thorough drying of fabrics of even thicknesses, e.g.
BABY JEANS Additional functions/options Application/properties 2 kg DELICATE , ANTI-CREASE , BUZZER , DELAY START Baby cycle is a special programme for jumpers to be dried “ready to wear”. DELICATE , ANTI-CREASE , BUZZER , DELAY START For leisure clothing, such as jeans, sweat-shirts, etc., of different material thicknesses (e.g. at the neck, cuffs and seams).
ton layer should be outermost). These fabrics will then dry better. Important! Do not overload the appliance. Observe max. loading volume.
Indicator lights These lights indicate the following functions: • Drying light: This light indicates that the appliance is in the drying phase. • End/Anti-crease light: This light is on at the end of the cooling phase, during the anticreasing phase and at the end of the programme. • Tank light: This light indicates that the appliance is in the drying phase. This light comes on at the end of the programme to remind you that the water reservoir must be emptied out.
II I 1 I Press the Start/Pause button to continue the drying cycle. Cleaning condenser 2 3 4 5 6 7 II Clean the door seal Wipe the door seal with a damp cloth immediately after the drying cycle has finished. Emptying the water reservoir Empty the water reservoir after every drying cycle. Important! • Never operate the dryer without condenser. • Clogged condenser cause higher energy consumption (drying cycle elongation) and dryer damage. • Do not use sharp objects to clean.
What to do if ... Troubleshooting by yourself Problem1) Possible cause Remedy Dryer not connected to mains supply. Plug in at mains socket. Check fuse in fuse box (domestic installation). Loading door opened. Close loading door The START PAUSE button not pressed. Press the START PAUSE button. Incorrect programme set. Set suitable programme. 2) Fluff filters clogged. Clean fluff filters. 3) Heat exchanger clogged. Clean heat exchanger. 3) Max. loading exceeded. Respect max. loading volume.
Machine settings Setting BUZZER permanent off Implementation 1. 2. 3. Water hardness Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the water compared to those prefixed by the factory could slightly influence the residual humidity of the laundry at the end of the cycle.
www.zanussi.
136920330-B-092012 www.zanussi.
