User manual

Changing the opening direction

of doors and Panelling

If your refrigerator has top panel, you can manage in

the same way from point 1 to point 7 and then:

8... Unscrew the axle of the upper hing (9) and replace

it at the opposite side (10).

For the remaining parts proceed the other way round.

Once finished make sure that all joints close

perfectly well all around the door and chek that the

internal light turns of when the fridge door closes.

How to panel the door:

If your appliance is provided with metal strips for

panelling and you wish to do so proceed as follows:

1... Remove one of the side strips.

2... Loosen the screws of the remaining strips.

3... Start putting on the panel where you took off the

strip pushing it right up to the end.

4... Replace the strip on this side.

5... Tighten all screws

NOTE:

The panel dimensions must be 2 mm. shor-

ter than the doors. Maximun thickness of

the panel is 4 mm.