User manual

8
ElŽments modulables
Clayettes
Les glissi•res se trouvant sur les parois de la cuve
permettent de positionner les clayettes ˆ diffŽrentes
hauteurs.
Balconnets
II est possible de modifier la position en hauteur des
balconnets sur la contre-porte selon vos besoins et
le volume des denrŽes ˆ stocker. Pour les enlever
poussez-les vers le haut.
D040
PR260
PR262
Calendrier de congŽlation
Les symboles correspondent ˆ diffŽrents types de produits congelŽs.
Les chiffres indiquent la durŽe de conservation en mois du type correspondant de produit. La durŽe de conservation
supŽrieure ou infŽrieure est valable en fonction de la qualitŽ des aliments et du traitement quÕils ont subi avant la
congŽlation.
33
CUSTOMER SERVICE AND SPARE PARTS
If the appliance is not functioning properly, check
that:
¥ the plug is firmly in the wall socket and the mains
power switch is on;
¥ there is an electricity supply (find out by plugging
in another appliance);
¥ the thermostat knob is in the correct position.
¥ If there are water drops on the bottom of the
cabinet, check that the defrost water drain
opening is not obstructed (see ÒDefrostingÓ
section).
¥ If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number
of your appliance which can be found on the
guarantee certificate or on the rating plate located
inside the appliance, on the bottom left-hand side.
2. remove any stored food, wrap it in several layers
of newspaper and put it in a cool place;
3. leave the door open;
4. when defrosting is completed, dry the interior
thoroughly;
5. turn the thermostat knob back to the required
setting or replace the plug in the power socket.
6. After two or three hours, reload the previously
removed food into the compartment.
Important:
A temperature rise of the frozen food packs,
during defrosting, may shorten their safe
storage life.
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
Do not use a mechanical device or any artificial
means to speed up the thawing process other
than those recommended by the manufacturer.