User manual

Symbol Oven function Application
Oven Lamp To activate the lamp without a cooking function.
Defrost This function can be used for defrosting frozen foods, such
as vegetables and fruits. The defrosting time depends on the
amount and size of the frozen food.
100 - 250 Thermaflow® To bake on up to two shelf positions at the same time and to
dry food. Set the temperature 20 - 40 °C lower than for
Conventional Cooking.
Activating and deactivating the top /
main oven
It depends on the model if your
appliance has knob symbols,
indicators or lamps:
• The indicator comes on when the
oven heats up.
• The lamp comes on when the
oven operates.
• The symbol shows whether the
knob controls one of the cooking
zones, the oven functions or the
temperature.
1. Turn the knob for the top / main oven
functions to select an oven function.
2. To deactivate the oven turn the knob for the
top / main oven functions to the off position.
Cooling fan
When the oven operates, the cooling fan turns
on automatically to keep the surfaces of the
oven cool. If you turn off the oven, the cooling
fan can continue to operate until the oven cools
down.
Using the core temperature sensor
The core temperature sensor measures the core
temperature of the meat.
There are two temperatures to be set:
• The oven temperature. Refer to the table for
roasting.
• The core temperature. Refer to the table for
the core temperature sensor.
CAUTION!
Only use the core temperature
sensor supplied with the appliance,
or genuine replacement parts.
1. Put the point of the core temperature
sensor into the centre of the meat.
2. Put the plug of the core temperature sensor
into the socket on the side of the appliance.
The indicator for the core temperature
sensor flashes.
3. Press the button or to set the core
temperature.
You can set the temperature from 30 °C to
99 °C. Refer to values in the table.
4. Set the oven function and the oven
temperature.
5. Press a button to stop the signal.
An acoustic signal sounds for two minutes,
when the meat is at the set core
temperature.
6. Deactivate the appliance.
7. Remove the plug of the core temperature
sensor from the socket. Remove the meat
from the appliance.
10 www.zanussi.com