User manual

Problem Possible cause Remedy
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The necessary settings are not
set
Control the settings
The oven lamp does not operate The oven lamp is defective Replace the oven lamp
Steam and condensation settle on
the food and in the oven cavity
You left the dish in the oven for
too long
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to the Safety chapters.
Location of the appliance
You can install your freestanding appliance
with cabinets on one or two sides and in the
corner.
B
A
Minimum distances
Dimension mm
A 690
B 150
Technical Data
Dimensions
Height 858 mm
Width 500 mm
Depth 600 mm
Total electricity power 8685 W
Voltage 400 V
Frequency 50 Hz
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
16
www.zanussi.com