Operation Manual

66
Instructions for the installer
The following instructions are meant for a qualified
installer, in order that the operations of installation,
regulation, and service are executed according to the
existing regulations.
Whenever changes are mode involving the disconnection
of the machine it is necessary to proceed with maximum
caution.
THE MANUFACTURING COMPANY DECLINES
ANY RESPONSABILITY FOR POSSIBLE
DAMAGES
RESULTING FROM AN INSTALLATION WHICH
DOESN'T COMPLY WITH THE RULES IN FORCE
Installation environnement
Installation and maintenance of the appliance must be
carried out by a professional qualified according to the
articles regulating the art in force, noteably: NBND 51003.
For appliances connected to the electricity network:
regulation NBN.
Once the cooker has been installed it is important to
remove the protective materials which were put on in the
factory.
We shall not be responsible in case of accidents or
incidents caused by inexisting or defective earthing.
Positioning
The appliance has been designed to be placed between
two furniture units whose height does not exceed the
cooker's plate height.
Oven
Top element 800 W
Bottom element 1000 W
Top + Bottom element 1800 W
Grill 1650 W
Oven lamp 25 W
Max. power rating: 1825 W
Voltage tension (50 Hz) 230 V/400 V 3N~
Hob
Front left hotplate Ø180 mm 2,0 kW
Front right hotplate Ø145 mm 1,5 kW
Back right hotplate Ø180 mm 1,5 kW
Back left hotplate Ø145 mm 1,0 kW
Max. power rating: 6000 W
Technical data
Dimensions of the appliance
Height 850 mm
Width 600 mm
Depth 600 mm
Appliance Class 1 and Class 2 Sub-Class 1
Total cooker rating: 7825 W
Levelling
The appliance is provided with adjustable small feet
placed in the back corners of the base.
By adjusting the small feet it is possible to ensure a
uniform distribution of the liquids contained in pans or
pots.