EN User Manual Cooker ZCG91206 ZCG91226 ZCG92226 EG JO LY MA SD TN
Contents Safety information Safety instructions Product description Before first use Hob - Daily use Hob - Hints and tips Hob - Care and cleaning 2 4 6 8 9 10 10 Oven - Daily use Oven - Clock functions Oven - Using the accessories Oven - Hints and tips Oven - Care and cleaning Troubleshooting Installation 11 13 13 14 18 19 20 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions.
• • • • • • • • • • • • • • • • • This appliance is not intended to be used on a ships, boats or vessels. Do not install the appliance behind a decorative door in order to avoid overheating. Do not install the appliance on a platform. Do not operate the appliance by means of an external timer or separate remote-control system. WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents. Safety instructions This appliance is suitable for the following markets: EG JO LY MA SD TN Installation • • • WARNING! Only a qualified person must install this appliance. • • • • • • • • • • • Remove all the packaging.
appliance according to current installation regulations. Pay attention to requirements regarding adequate ventilation. Use • WARNING! Risk of injury and burns. Risk of electrical shock. • • • • • • • • This appliance is for household use only. Do not change the specification of this appliance. Make sure that the ventilation openings are not blocked. Do not let the appliance stay unattended during operation. Deactivate the appliance after each use.
• • • • • • Fat and food remaining in the appliance can cause fire. Clean regularly the appliance to prevent the deterioration of the surface material. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects. If you use an oven spray, obey the safety instructions on the packaging. Do not clean the catalytic enamel (if applicable) with any kind of detergent. Do not clean the burners in the dishwasher.
ZCG91226WA 943006183 ZCG91206WA 943006155 ZCG91226XA 943006185 ZCG91206XA 943006156 ZCG92226XA 943006389 X X X X X X X X X X X X X X X Oven ignition on the spark generator button X X X X X Hob thermocouple X X X Oven thermocouple X X X X X X X X X X X X X X X Model denomination and PNC number Initial gas settings Natural gas LPG Additional gas injectors Hob integrated ignition on the control knob Hob ignition on the spark generator button Oven integrated igni
Cooking surface layout 1 2 3 6 5 4 1 Auxiliary burner 2 Steam outlet - number and position depend on the model 3 Semi-rapid burner 4 Semi-rapid burner 5 Triple Crown burner 6 Rapid burner Accessories • • • • Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits. Turnspit For roasting larger joints of meat and poultry. Storage compartment The storage compartment is below the oven cavity. To use the compartment, lift the lower front door then pull it down.
Hob - Daily use WARNING! If the burner accidentally goes out, turn the knob to the off position and try to light the burner again after minimum 1 minute. Refer to Safety chapters. Ignition of the hob burner Always light the burner before you put on the cookware. Burner overview WARNING! Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse.
Turning the burner off WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. To put the flame out, turn the knob to the off position . Hob - Hints and tips WARNING! Diameters of cookware Refer to Safety chapters. WARNING! Use cookware with diameters applicable to the size of burners. Cookware WARNING! Do not put the same pan on two burners. Burner WARNING! Do not put unstable or damaged pots on the burner to prevent from spill and injury.
Pan supports The pan supports are not resistant to washing in a dishwasher. They must be washed by hand. 1. Remove the pan supports to easily clean the hob. Be very careful when you replace the pan supports to prevent the hob top from damage. 2. The enamel coating occasionally can have rough edges, so be careful when you wash the pan supports by hand and dry them. If necessary, remove stubborn stains with a paste cleaner. 3. After you clean the pan supports, make sure that they are in correct positions. 4.
Manual ignition of oven gas burner In case of absence of the electricity you can ignite the oven burner without an electrical device. 1. Open the oven door. 2. Hold the flame near the hole in the bottom of the oven cavity. The grill temperature cannot be adjusted. To get a lower temperature or slower cooking time, lower the grill pan away from the flame. Do not put the meat directly on the tray or pan. CAUTION! Do not put the meat on the highest shelf level. There is a risk of fire. CAUTION! 3.
Oven - Clock functions Minute Minder This function has no effect on the operation of the appliance. Turn the knob for the timer as far as it goes, then turn it to necessary time period. After the time period is completed, an acoustic signal sounds. Oven - Using the accessories WARNING! Using the turnspit Refer to Safety chapters. WARNING! Be careful when you use the turnspit. The forks and the spit are sharp. There is a risk of injury.
A 4. Install the first fork on the spit, then put the meat on the turnspit and install the second fork. Make sure that the meat is in the middle of the spit. 5. Use the screws to tighten the forks. 6. Put the tip of the spit into the turnspit hole. Refer to "Product description" chapter. 7. Put the front part of the spit on the support hook. 8. Remove the turnspit handle. 9. Light the grill. Refer to "Oven - Daily use" chapter. 10. Press the turnspit button . 11. Make sure that turnspit rotates. 12.
• If you cannot find the settings for a special recipe, look for the one that is almost the same. • You can extend baking times by 10 – 15 minutes if you bake cakes on more than one shelf position. • Cakes and pastries at different heights do not always brown equally at first. If this occurs, do not change the temperature setting. The differences equalize during the baking procedure.
Meat & Poultry Food Quantity (kg) Temperature (°C) Time (min) Shelf position Sheep 3.0 - 4.0 210 90 - 120 2 Chicken 2.0 - 3.5 240 90 - 1101) 2 Duck 2.4 - 3.6 240 80 - 90 2 Goose 5.0 - 6.0 240 80 - 90 2 Rabbit 2.0 - 3.0 195 90 - 120 2 Beef 2.4 - 3.0 210 90 - 120 2 1) Turn oven after 50 min. Fish Food Quantity (kg) Temperature (°C) Time (min) Grill position Grilling time (min) Total preparation time (min) Shelf position Pike 1.6 - 3.0 180 50 - 60 min.
Cakes Food Flat cake Quantity (kg) Temperature (°C) Time (min) Grill position Grilling time (min) Total preparation time (min) Shelf position 1.2 - 1.5 180 20 - 30 min. 5 - 10 30 - 40 2 3.0 - 3.5 165 90 - 110 - - 90 - 110 2 Feter Mshal- 2.5 - 3.0 ted 210 40 - 45 - - 40 - 45 2 3.0 - 3.5 195 50 - 60 - - 50 - 60 2 2.5 - 3.0 195 45 - 50 - - 45 - 50 2 1) Sponge cake 1) Salty cake 1) Yeast cake 1) 1) Preheat the oven for 15 minutes.
Oven - Care and cleaning WARNING! Refer to Safety chapters. Notes on cleaning • • • • • • Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. To clean metal surfaces, use a dedicated cleaning agent. Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. Clean stubborn dirt with a special oven cleaner. Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent.
Replacing the lamp 3 Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. 2 2 WARNING! 7. Clean the oven door with water and soap. Clean inner side of the door. Dry the oven door carefully. When the cleaning is completed, install the glass panels and the oven door. To install the oven door, do the above steps in the opposite sequence. 1. Deactivate the appliance. 2. Remove the fuses from the fuse box or deactivate the circuit breaker.
Problem Possible cause Remedy The flame ring is uneven. Burner crown is blocked with food residues. Make sure that the injector is not blocked and the burner crown is clean. The burners do not work. There is no gas supply. Check the gas connection. The appliance makes noises. Some metal parts of the appliance expand and contract when they heat up or cool down. The noises are normal. The flame colour is orange or yellow. The flame can look orange or yellow in some areas of the burner.
Keep a distance of about 1 cm between the appliance and the back wall to make sure that the lid opens. For minimal distances for fitting check the table.
Gas burners for NATURAL GAS G20 20 mbar BURNER NORMAL POWER kW REDUCED POWER kW INJECTOR MARK 1/100 mm Triple Crown 4.0 1.8 146 Rapid 3.0 0.72 119 Semi-rapid 2.0 0.43 96 Auxiliary 1.0 0.35 70 Oven 3.9 1.5 136 Grill 3.0 1.6 126 NORMAL POWER kW REDUCED POWER kW INJECTOR MARK 1/100 mm Triple Crown 4.0 1.8 101 Rapid 3.0 0.72 88 Semi-rapid 2.0 0.43 71 Auxiliary 1.0 0.35 50 Oven 3.9 1.5 95 Grill 3.0 1.
Flexible nonmetal pipes connection If you have an easy access to the connection, you can use a flexible pipe. The flexible pipe must be tightly attached by clamps. In installation always use the pipe holder and the gasket.
Adjusting the minimum gas level on the hob burner 1. Disconnect the appliance from the electricity. 2. Remove the knob for the hob. If there is no access to the bypass screw dismount the control panel before adjustment start. 3. With a thin and flat screwdriver adjust the bypass screw A. The model determines the position of the bypass screw A. A A Changing from natural gas to liquid gas 2. Carefully remove from the burner the thermocouple A. Next remove the spark plug B. 1.
3. With a thin and flat screwdriver adjust the bypass screw A. The model determines the position of the bypass screw A. 1 A 2 Changing from natural gas to liquid gas 1. Fully tighten the bypass screw. 2. Put the knob back. 3. Connect the appliance to the electricity. 4. Release the burner injector with a 7 mm socket spanner and replace it with a right one. Changing from liquid gas to natural gas 1. Unscrew approximately one turn the bypass screw position A. 2.
A 3. Put the appliance on the sidewall on a clean and smooth surface. Place each foot into a separate hole, in the plinth, and rotate it clockwise. 2. Release the burner injector with a 7 mm socket spanner and replace it with a right one. B 3. Assemble the burner in a reverse sequence. Before you fix the screw, make sure that the burner is pushed correctly to the back panel. Test the grill injectors. Levelling 4.
This appliance is supplied with a main plug and a main cable. WARNING! The power cable must not touch the part of the appliance shaded in the illustration. ENVIRONMENTAL CONCERNS marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. Recycle materials with the symbol . Put the packaging in relevant containers to recycle it.
867330144-C-312017 www.zanussi.
