User manual

Minimal distances
Dimension mm
A 650
B 150
C 2
D 400
E 450
F less than 400
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
The stability chain
Caution! You must install the stability
chain. If you do not install it the appliance
can tilt.
Before you install stability chain, adjust the
appliance to the correct height.
Measure down 180 mm from the appliance
top surface, then measure right 30 mm (See
picture). Mark the position of the wall and this
gives anchor point for the stability chain.
30 mm
180 mm
Warning! These instructions are only
valid in the countries whose symbols
appear on this booklet's cover.
Gas Category I2H
Gas Supply G20 (2H) 20mbar
Gas burners
BURNER NORMAL POWER NATURAL GAS
kW inj. 100/mm Btu/h
Auxiliary burner 1,0 70 3412
Semi-rapid burner 1,9 96 6483
Rapid burner 2,9 119 10236
Grill 2,7 120 9212
Top Oven 1,9 99 6483
Main Oven 1,9 99 6483
Gas Connection
Use a flexible pipe in compliance with the reg-
ulation in force. Be careful they do not come in
touch with mobile parts or they are not
squeezed.
Warning! Only a qualified and
competent person must do the gas
installation.
20
www.zanussi.com