User manual

11
Burners
The burner caps and crowns can be removed for
cleaning.
Wash the burners caps and crowns using hot soapy
water, and remove marks with a mild paste cleaner.
A well-moistened soap impregnated steel wool pad
can be used with caution, if the marks are
particularly difficult to remove.
After cleaning, be sure to wipe dry with a soft cloth.
Oven lamp replacement
Ensure that the appliance is switched off
before replacing the lamp to avoid possibility
of electric shock.
If the oven bulb needs replacing, it must comply with
the following specifications:
Electric Power: 15W
Electric Rate: 230V (50Hz)
Resistant to temperatures of: 300ºC
Connection Type: E14
To replace the faulty bulb.
• Turn the glass cover anticlockwise and remove.
• Remove the faulty bulb and replace with a new
one.
• Refit the glass cover.
Reconnect the appliance to the electricity supply.
Something not working
If the appliance does not work properly, check the
following points before asking for service; there
could be simple problems that
you could remedy by yourself; if not, contact your after
Sales Service.
Symptoms Solutions
No burner ignition Check:
Gas supply is completely open
The position of gas pipe is correct
The burner is not wet
The burner cap and ring burner have been replaced
correctly after cleaning
The gas ring burns unevenly Check:
The main jet is not blocked and the ring burner is clean
of food particles
The burner cap and ring burner have been replaced
correctly after cleaning
Oven or grill burners does not ignite Check:
The burner is in its correct place
The burner is not wet
The control knob has been pressed for 10 seconds
upon ignition