User manual

Dimension mm
B 150
C 2
D 400
E 50
F less than 400
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
The stability chain
Caution! You must install the stability
chain. If you do not install it the appliance
can tilt.
Before you install stability chain, adjust the
appliance to the correct height.
Measure down 180 mm from the appliance
top surface, then measure right 30 mm (See
picture). Mark the position of the wall and this
gives anchor point for the stability chain.
30 mm
180 mm
Warning! These instructions are only
valid in the countries whose symbols
appear on this booklet's cover.
Gas Category I3+
Gas Supply G30/31 (3+) –
28-30/37 mbar
Gas burners
BURNER NORMAL POWER LPG
kW inj. 100/mm g/h
Auxiliary burner 1,0 50 71,8
Semi-rapid burner 2,0 71 136,5
Rapid burner 3,0 88 244,12
Grill 2,7 95 194
Top Oven 1,9 70 136,5
Main Oven 1,9 70 136,5
Warning! Only a qualified and
competent person must do the gas
installation.
Gas Connection
Use a flexible pipe in compliance with the reg-
ulation in force. Be careful they do not come in
touch with mobile parts or they are not
squeezed.
Warning! Before gas connection
disconnect the mains plug from the
mains socket or switch off the fuse in
the fuse box. Close the primary valve of
the gas supply.
21
www.zanussi.com