User manual

Dimension mm
D 400
E 450
F less than 400
Levelling of the appliance
Use small feet on the bottom of appliance to set
the appliance top surface level with other
surfaces.
The stability chain
CAUTION!
Install the stability chain to prevent
the appliance from tilting. The
stability chain only works when the
appliance is put in a correct area.
1. Measure down 180 mm from the appliance
top surface, then measure right 30 mm.
2. Mark the position of the wall and this gives
anchor point for the stability chain.
30 mm
180 mm
Other technical data
WARNING!
These instructions are only valid in
the countries whose symbols appear
on this booklet's cover.
Gas cate-
gory:
I3+
Gas supply G30/31 (3+) 28-30/37 mbar
Gas burners
BURNER NORMAL POWER
kW
LPG
INJECTOR MARK 1/100 mm g/h
Auxiliary 1.0 50 71.8
Semi-rapid 2.0 71 136.5
Rapid 3.0 88 244.1
Grill 2.7 95 194.0
Top Oven 1.7 62 123.6
Main Oven 1.7 62 123.6
Gas Connection
Use a flexible pipe in compliance with the
regulation in force. Make sure they do not come
in touch with mobile parts and are not
squeezed.
22 www.zanussi.com