User manual

Problem Possible cause Remedy
The appliance makes noises. Some metal parts of the appli-
ance expand and contract when
they heat up or cool down. The
noises are normal.
The display shows "12.00". There was a power cut. Reset the clock.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
WARNING!
Refer to Safety chapters.
Technical data
Dimensions
Height 894 - 912 mm
Width 550 mm
Depth 600 mm
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For the minimal distances of fitting check the
table.
A
E
C
B
D
F
Minimum distances
Dimension mm
A 650
B 150
C 2
www.zanussi.com 21