User manual

10
Reversibilidad de la puerta
Desconecte el enchufe antes de efectuar cualquier
tipo de operación.
Para cambiar la dirección de apertura de la puerta,
proceda de la manera siguiente:
1. Extraiga la rejilla de ventilación (D) encajada.
2. Desmonte el cubreagujero (G) y la bisagra
inferior (E) desenroscando los dos tornillos que
la fijan.
3. levante y saque la puerta del perno (G),
desenrosque el perno y colóquelo en el lado
opuesto;
4. Quite los dos tapones de las puertas (donde
están previstos), dejando descubiertos los
agujeros para los pernos de la bisagra y vuelva a
montarlos en el lado opuesto;
5. vuelva a montar la puerta;
6. Con una llave de 10 mm desenrosque el perno de
la bisagra (E) y vuelva a montarlo en el lado
opuesto de la bisagra.
7. Vuelva a montar la bisagra inferior (E) en el lado
opuesto utilizando los tornillos que se habían
quitado; introduzca los cubreagujeros (G) en la
bisagra inferior. Quite los cubreagujeros (F) de la
rejilla de ventilación (D) empujándolos en el
sentido de la flecha y móntelos nuevamente en el
lado opuesto.
8. Vuelva a montar la rejilla de ventilación (D)
encajándola.
9. Desenrosque la manilla. Colóquelas nuevamente
en el lado opuesto después de haber perforado
los tapones con un punzón. Cubra los agujeros
que han quedado descubiertos con los tapones
contenidos en la bolsita entregada junto con la
documentación.
Atención
Terminada la operación de reversibilidad de la
puerta, controlar que la empaquetadura magnética
esté adherida al mueble. Si la temperatura ambiente
es fría (por ejemplo en invierno), puede suceder que
la empaquetadura no adhiera perfectamente al
mueble. En este caso esperar que la
empaquetadura se recobre en forma natural o bien
acelerar dicho proceso calentando la parte
interesada con un normal secador de cabellos.
G
F
D
PR18
F
F
F
E
E
D162/a
D594
Distanciadores posteriores
En la bolsita de la documentacion hay dos
distanciadores que deberàn ser montados como se
muestra en la figura.
Aflojar los tornillos, introducir el distanciador debajo
de la cabeza del tronillo y volver a atornillar.
11
WARNINGS
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is supplied with the appliance in order that the
new owner can be acquainted with the functioning of the appliance and the relevant warnings.
If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock
(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old
appliance. This will prevent it from becoming a death-trap for a child.
These warnings are provided in the interest of safety.You must read them carefully before installing or
using the appliance.
General Safety
This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the product.
It is dangerous to alter the specifications or
modify this product in any way.
Before any cleaning or maintenance work is carried
out, be sure to switch off and unplug the appliance.
This appliance is heavy. Care should be taken
when moving it
Ice lollies can cause frost burns if consumed
straight from the appliance.
Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible
fluid leakages.
The appliance must not be located close to
radiators or gas cookers.
Avoid prolonged exposure of the appliance to
direct sunlight.
There must be adequate ventilation round the
back of the appliance and any damage to the
refrigerant circuit must be avoided.
For freezers only (except built-in models): an
ideal location is the cellar or basement.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.
Service/Repair
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person
This product should be serviced by an authorized
Service Centre, and only genuine spare parts
should be used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunctioning. Refer to your local
Service Centre, and always insist on genuine
spare parts.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging must
therefore only be carried out by authorized
technicians.
Use
The domestic refrigerators and freezers are
designed to be used specifically for the storage
of edible foodstuffs only.
Best performance is obtained with ambient
temperature between +18°C and +43°C (class T);
+18°C and +38°C (class ST); +16°C and +32°C
(class N); +10°C and +32°C (class SN). The
class of your appliance is shown on its rating
plate.
Warning: when the ambient temperature is not
included within the range indicated for the class
of this appliance, the following instructions must
be observed: when the ambient temperature
drops below the minimum level, the storage
temperature in the freezer compartment cannot
be guaranteed; therefore it is advisable to use the
food stored as soon as possible.
Frozen food must not be re-frozen once it has
been thawed out.
Manufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.
The inner lining of the appliance consists of
channels through which the refrigerant passes. If
these should be punctured this would damage the
appliance beyond repair and cause food loss. DO
NOT USE SHARP INSTRUMENTS to scrape off
frost or ice. Frost may be removed by using the
scraper provided. Under no circumstances should
solid ice be forced off the liner. Solid ice should be
allowed to thaw when defrosting the appliance.
Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance.