User manual

For refitting the upper door holder take out the

screws (2 pieces) fixing the plastic top on the back

of the box.

Push back the top and lift it from the fixing

elements.

Unscrew the screws fixing the upper door holder

(2 pieces).

After unscrewing turn over the pin in the door

holder plate in the direction of the arrow.

Fit and fix the door holder plate on the other side

without displacing the door.

Put back the plastic top on the fixing elements and

pull it forward.

Fix the top with the screws (2 pieces) on the back

side of the box.

Before refitting the handle drill the plastic nails on

the other side of the door, then refit the handle and

the plastic nails taken out of the bag on the

opposite side.

Put the appliance to its place, set it level and plug it

into the mains socket.

In case you do not want to perform the procedures

above, call the nearest brand-mark service.

Technicians will accomplish the refitting expertly for

charge.