ELECTRIC OVENS ZBF 859 ZBS 869 INSTRUCTION BOOKLET IL
English Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Installation It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. It is dangerous to alter the specification in any way.
Contents For the User For the Installer Important Safety Information 2 Technical Data 11 Description of the Oven 3 Installation 11 When the oven is first installed 5 Electrical connection 12 Using the Oven 5 Cooking Tables 7 Cleaning and maintenance 8 Technical Assistance 10 Something not working... 10 Description of the Oven Oven function control knob (Fig.
Thermostat control knob (Fig. 2) Model ZBF 859 50 Turn the thermostat control knob to select temperatures between 50°C and 250°C / MAX. Thermostat control light (°C) 100 150 FO 2617 Model ZBS 869 50 End of cooking programmer (Fig. 3) 100 MAX This device allows you to make the oven switch off automatically once the preset time is over. An acousitic signal will be heard when the cooking is completed.The cooking duration can be set up to 90 minutes maximum.
When the oven is first installed Before cooking for the first time, carefully wash the oven accessories. F Once the oven has been installed: a) set the thermostat knob to MAX (250); b) switch the oven function control knob to conventional cooking ( ); c) allow the oven to run empty for approximately 45 minutes; d) open a window for ventilation. During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing.
Using the oven Always cook with the oven door closed Conventional cooking Turn the oven function control knob to the relevant symbol ( ) and set the thermostat knob on the required temperature. If you need more heat from the bottom of the oven, turn the oven function control knob to (bottom heating element only). Fan cooking Turn the oven function control knob to the relevant symbol ( - ) and set the thermostat knob on the required temperature.
Cooking Tables Conventional and fan cooking WEIGHT (GR.
Cooking Tables Grilling Quantity TYPE OF DISH 4 3 2 1 PIECES WEIGHT Level Steaks Chops Sausages Chicken (cut in pieces) Kebabs Chicken (breast) Tomatoes Fish (fillets) Sandwiches Toast 4 4 8 6 4 4 8 4 4 4 800 600 500 800 700 400 500 400 Cooking time (minutes) Grilling 4 4 4 3 4 4 4 4 4 4 temp.
Replacing the Oven Light Ensure the electricity supply is switched off before carrying out this operation. The oven bulb has to comply to these features: a) resistant to temperatures of 300 °C; b) electric rate: 230 V - 50 Hz; c) electric power rate: 25 W; d) connection type: E 14. To replace the bulb, proceed as follows (Fig. 10): a) push in and turn the glass lid anticlockwise; b) remove tha faulty bulb; c) replace it with a new one; d) refit the glass lid; e) switch on the electricity supply.
Something not working... If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Centre. SYMPTOM SOLUTION n The oven does not come on uCheck that both a cooking function and a temperature have been selected or uCheck the appliance is wired in properly, and the socket switch or the switch from the mains supply to the oven are ON.
Technical Data Recess dimensions Heating elements ratings in-column 58,0 cm Bottom heating element undertop 59,1 cm Top heating element Width 56,0 cm Full Oven (Top+Bottom) (1000 + 800) 1800 W Depth 55,0 cm Simple Grill heating element 1750 W Double Grill heating element 2550 W Oven rear heating element 2000 W Height Oven cavity dimensions Height 32,5 cm Width 42,0 cm Depth 39,0 cm Volume 53 l Installation The following instructions are meant to a qualified technician, in order
Securing the oven to the cabinet - Fit the appliance into the cabinet recess. Open the oven door and secure the oven to the kitchen cabinet with four wood screws, which fit the holes provided in the oven frame (Fig.16). When installing an electric plate hob over the oven, the hob's electrical connection and the oven's one have to be carried out separately, for security reasons and to let the oven be taken off the unit easier, if necessary. Fig.