User manual

The appliance must be earthed. The power supply cable
plug is provided with a contact for this purpose. If the
domestic power supply socket is not earthed, connect the
appliance to a separate earth in compliance with current
regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above
safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
Door reversibility
The door of the appliance opens to the right. If you want
to open the door to the left, do these steps before you
install the appliance:
• Loosen the upper pin
and remove the spacer.
• Remove the upper pin
and the upper door.
C
B
A
• Remove the hinge cover
(A). Unscrew the pins
(B) and spacers (C). Fit
the hinge cover (A).
• Remove the lower door.
• Loosen the lower pin.
On the opposite side:
• Install the lower pin.
• Install the lower door.
• Refit the pins (B) and the
spacers (C) on the mid-
dle hinge on the oppo-
site side.
• Install the upper door.
• Tighten the spacer and
tighten the upper pin.
Ventilation requirements
The airflow behind the ap-
pliance must be sufficient.
50 mm
min.
200 cm
2
min.
200 cm
2
Installing the appliance
Caution! Make sure that the mains cable can move
freely.
Do the following steps:
12