User manual

If the appliance is to be fitted laterally to the kitchen

unit, it will be sufficient to loosen the screws of the

little plates (D), move them as shown in Fig. and

then fasten them up again. Fit the cover (E).

D734

PR168

PR167/1

Place the small square on the guide again and fix it

with the screws supplied.

Should the lining up of the furniture door be

necessary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.

Fix cover (Hd) on guide (Hb) until it clips into place.

8mm

Remove the brackets and mark a distance of 8 mm

from the outer edge of the door where the nail must

be fitted (K).