User manual

The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes) for
a few seconds.
2. Press the Timer regulator to change the
Timer set value from 1 to 90 minutes.
3. Press OK to confirm.
TheDrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm sounds.
Press OK to switch off the sound and terminate
the function.
To switch off the function repeat the procedure
until the DrinksChill goes off.
It is possible to change the time at
any time during the countdown and
at the end by pressing the
Temperature colder button and the
Temperature warmer button.
DYNAMICAIR function
1. Press Mode until the corresponding icon
appears.
The DYNAMICAIR indicator flashes.
2. Press the OK to confirm.
The DYNAMICAIR indicator appears.
The activation of the DYNAMICAIR
function increases energy
consumption.
If the function is activated
automatically the DYNAMICAIR
indicator is not shown (refer to "Daily
use").
To switch off the function, repeat the procedure
until the DYNAMICAIR indicator goes off.
First use
Cleaning the interior
Before using the appliance for the first time, the
interior and all internal accessories should be
washed with lukewarm water and some neutral
soap to remove the typical smell of a brand-new
product, then dried thoroughly.
CAUTION!
Do not use detergents or abrasive
powders, as these will damage the
finish.
Daily use
WARNING!
Refer to Safety chapters.
Positioning the door shelves
To permit storage of food packages of various
sizes, the door shelves can be placed at
different heights.
1. Gradually pull the shelf in the direction of
the arrows until it comes free.
2. Reposition as required.
2
1
3
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
Do not move the glass shelf above
the vegetable drawer and the bottle
shelf to ensure correct air
circulation.
www.zanussi.com 7