User manual

Ha Hb
HdHc
a. Install the part (Ha) on the inner side of
the kitchen furniture.
21 mm
21 mm
~50 mm
~50 mm
90
o
90
o
b. Push the part (Hc) on the part (Ha).
Ha
Hc
14. Open the appliance door and the kitchen
furniture door at an angle of 90°.
a. Insert the small square (Hb) into guide
(Ha).
Hb
Ha
8 mm
b. Put together the appliance door and the
furniture door and mark the holes.
15. Remove the brackets and mark a distance
of 8 mm from the outer edge of the door
where the nail must be fitted (K).
Ha
8 mm
K
16. Place the small square on the guide again
and fix it with the screws supplied.
17. Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
Hb
18. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is
attached tightly to the cabinet.
If the ambient temperature is low (for
example, in winter), the size of the
gasket decreases. The size of the
gasket increases when the ambient
temperature increases.
www.zanussi.com 17