User manual

Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
WARNING!
If the cabinet will be kept on, ask
somebody to check it once in a
while to prevent the food inside from
spoiling in case of a power failure.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem Possible cause Solution
The appliance does not operate. The appliance is switched off. Switch on the appliance.
The mains plug is not connec-
ted to the mains socket cor-
rectly.
Connect the mains plug to the
mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical appli-
ance to the mains socket. Contact
a qualified electrician.
The appliance is noisy. The appliance is not supported
properly.
Check if the appliance stands sta-
ble.
Audible or visual alarm is on. The cabinet has been recently
switched on or the temperature
is still too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The temperature in the appli-
ance is too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The door is left open. Close the door.
Power indicator light is flashing. An error has occurred in meas-
uring the temperature.
Contact a qualified electrician or
contact the nearest Authorised
Service Centre.
The appliance is not working
properly.
Contact a qualified electrician or
contact the nearest Authorised
Service Centre.
The temperature in the appli-
ance is too high.
Contact a qualified electrician or
contact the nearest Authorised
Service Centre.
www.zanussi.com 11