User manual

1
2
3
Install the appliance in
the niche.
Push the appliance in
the direction of the ar-
rows (1) until the up-
per gap cover stops
against the kitchen fur-
niture.
Push the appliance in
the direction of the ar-
rows (2) against the
cupboard on the op-
posite side of the
hinge.
44mm
4mm
4
Adjust the appli-
ance in the niche.
Make sure that the
distance between
the appliance and
the cupboard front-
edge is 44 mm.
The lower hinge
cover (in the acces-
sories bag) makes
sure that the dis-
tance between the
appliance and the
kitchen furniture is
correct.
Make sure that the
clearance between
the appliance and
the cupboard is 4
mm.
Open the door. Put
the lower hinge cov-
er in position.
I
I
5
Attach the appli-
ance to the niche with
4 screws.
6
Remove the cor-
rect part from the
hinge cover (E).
Make sure to re-
move the part DX, in
the case of right
hinge, SX in oppo-
site case.
E
E
D
C
B
7
Attach the covers
(C, D) to the lugs and
the hinge holes.
Install the vent grille
(B).
Attach the hinge cov-
ers (E) to the hinge.
Ha Hb
HdHc
8
Disconnect the
parts (Ha), (Hb),
(Hc) and (Hd).
50 mm
21 mm
90°
21 mm
50 mm
9
Install the part (Ha)
on the inner side of the
kitchen furniture.
Ha
Hc
10
Push the part
(Hc) on the part
(Ha).
Hb
Ha
8 mm
11
Open the appliance
door and the kitchen
furniture door at an an-
gle of 90°.
Insert the small square
(Hb) into guide (Ha).
Put together the appli-
ance door and the fur-
niture door and mark
the holes.
Hb
12
Place the small
square on the guide
again and fix it with
the screws supplied.
Align the kitchen fur-
niture door and the
appliance door by
adjusting the part
Hb.
11
www.zanussi.com