User manual

27
REPLACEMENT OF THE TOP
INJECTORS
To replace the injectors, raise the cook-
top in the following manner:
– Pull the lid “A” upwards to remove
from the cooker.
– Remove the pan supports and burners
from the cooktop.
– Remove the 4 screws “B” and the cen-
tral screw “C” (fig. 8.4a - fig. 8.4b).
– Remove the two hinge brackets “D” by
pulling them upwards.
– Raise the cooktop in the direction
shown by the arrow “E”.
– Prop the cooktop up.
B
B
A
E
E
Fig. 8.4a
C
C
B
B
B
B
Fig. 8.4b
IMPORTANT:
To replace the adapters it is necessary
to operate with 2 spanners (fig. 8.3).
After connecting to the mains, check
that the couplings are correctly
sealed, using soapy solution, but
never a naked flame.
From time to time check to make sure
that the rubber tube is in perfect con-
dition and substitute it at printed due
date or if it shows signs of wearing or
damage.
D
D