User`s manual

USER’S MANUAL
Z
-2130
20
Upload
Select “4. Upload” from the “System Menu” to open the Upload menu. The following
screen appears:
Upload Data
1. Select “System Menu>4.Upload>1.Upload Data” to enter the upload data screen.
2. The name of the file is displayed on the screen. Press M2 to select Y or N for data
upload. Press Enter to confirm.
3. If there is another file to be uploaded, its name will then be displayed on the
screen. Repeat the above procedure to choose and confirm.
4. Ready to upload screen appears. Press Enter to begin upload.
Delimiter Set
1. Select “System Menu>4.Upload>2.Delimiter Set” to enter the setup screen.
2. Select a parity characters as the Field Delimiter: None,
,
, ;, Space, CRLF, CR, and LF.
3. Select a parity characters as the Record Delimiter: None,
,
, ;, Space, CRLF, CR, and
LF.
4. To decide whether the Upload Header is to be uploaded, press the left or right
arrow buttons to change the value to On or Off. Press Enter to confirm.