User`s manual

Z-2130

USER’S MANUAL

Code 128

1. To turn this symbology on or off, use the left or right arrow buttons to change

the value and press Enter to confirm.

2. When Code 128 is set to “ON”, pressing M2 will lead to more options:

 Enable EAN 128: On, Off.

 Code 128 Length: Enter length 1 to 64 for the Min/Max length.

Select the appropriate parameters and press Enter to setup the next symbology.

Code 93

To turn this symbology on or off, use the left or right arrow buttons to change the

value and press Enter to exit.

Advanced Setup

Select “System Menu>3.Setup>3.Barcode Setup>2.Advanced Setup” to enter the setup.

The following options appear:

CPC 25

1. To turn this symbology on or off, use the left or right arrow buttons to change

the value and press Enter to confirm.

2. When CPC 25 is set to “ON”, pressing M2 will lead to more options:

 CPC 25 CDV: On, Off.

 CPC 25 CKD: Send, No Send.

 CPC 25 Length: Enter length 1 to 64 for the Min/Max length.

Select the appropriate parameters and press Enter to setup the next symbology.

EAN to ISBN/ISSN

To turn this symbology on or off, use the left or right arrow buttons to change the

value and press Enter to setup the next symbology.

EAN-13 digits

To set the digits, press the left or right arrow buttons to change the value to 12 or 13

and press Enter to setup the next symbology.