User`s manual

Z-2130
16
USER’S MANUAL
Password
1. Select “System Menu>3.Setup>2.System
Setup>3.ID/PW/DateMode>2.Password” to enter the setup to set your
password.
2. Enter the password if a password had already been set and press Enter.
3. Enter the new password and press Enter.
4. Enter the new password again to reconfirm and press Enter.
Date Mode
1. Select “System Menu>3.Setup>2.System Setup>3.ID/PW/DateMode>3.Date
Mode” to enter the setup.
2. Use the left or right arrow buttons to change the date mode: MM/DD/YYYY,
DD/MM/YYYY, MM/DD/YY, or DD/MM/YY. Press Enter to confirm.
Barcode Setup
Select “System Menu>3.Setup>3.Barcode Setup” to open Barcode setup. The following
options appear:
Basic Setup
Select “System Menu>3.Setup>3.Barcode Setup>1.Basic Setup” to enter the setup. The
following options appear:
EAN/UPC
1. To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to confirm.
2. When EAN/UPC is set to “ON”, pressing M2 will lead to more options:
 UPC-A Digits: 11, 12, 13.
 UPC-E Digits: 6, 7, 8.
 UPC-E to UPC-A: On, Off.
 UPC/EAN ADD 5: No Send, Send.
 UPC/EAN ADD 2: No Send, Send.
Select the appropriate parameters and press Enter to setup the next symbology.