User`s manual

Z-2130
14
USER’S MANUAL
Beep Volume
1. Select “System Menu>3.Setup>>1.Basic Setup>2.Beep Volume” to enter the
setup.
2. Press the left or right arrow buttons to change the volume to Loud, Medium, Low,
or Quiet. Press Enter to confirm.
Auto Power Off
1. Select “System Menu>3.Setup>>1.Basic Setup>3.Auto Power Off” to enter the
setup.
2. Press the left or right arrow buttons to change the time. Press Enter to confirm.
System Setup
Select “System Menu>3.Setup>2.System Setup” to open System Setup menu. The
following options appear:
Communication
Select “System Menu>3.Setup>2.System Setup>1.Communication” to enter the setup.
The following options appear:
Comm. Paramter
Select “System Menu>3.Setup>2.System Setup>1.Communication>1Comm. Paramter”
to set the Baud Rate, Parity Check, Data Bits, and Stop Bit of the data collector. Use the
left or right arrow buttons to change the value and Press M1 to exit when you are
done.
 Baudrate options: 4800,9600,19200,38400,57600,115200.
 Parity Check: Even, Mark, None, Odd, Space.
 Data Bits options: 8,7.
 Stop Bits: None, One, OnePointFive, Two.