User`s manual

Z-2130
12
USER’S MANUAL
5. Set the field length by entering the minimum and maximum field length from 1
to 32. Press Enter to confirm.
6. Set the Prompt by entering a message. 16 maximum characters are allowed.
Press Enter to confirm.
7. Enter Field Editing to prompt how many kinds of character you can use, and
what they are. For example, if the data you are going to input in a certain field
contains 4 alphabetical characters, of which the first one is an upper case
character and the others lower case ones, you input “ulll.” Please see the
following table for symbols you can use.
Editing Meaning
n number 0 ~ 9 and + , -
d number 0 ~ 9
a all Alpha characters A ~ Z , a ~ z
u upper case Alpha characters A ~ Z
l Lower case Alpha character a ~ z
c Full ASCII characters
p printable ASCII characters, ASCII code(32 - 127)
* Remove control character
The characters represented by ”*”, such as the check character(s) in the
barcodes, will be deleted when the data is stored. Characters other than
the symbols mentioned above (n, d, a, u, l, c, p, *) will be regarded as
format symbols.
8. Continue from the previous step when necessary; press the left or right arrow
buttons to select the Insert to Data options. This option is to specify if the format
symbols such as “/” should be stored as a part of the data to be input in the field.
For example, “123110” input as a “date” will be displayed as 12/31/10 if you
check this option.
 Display Only: Display special characters only .
 Yes. Add it: Add special characters to data.
9. At the Delay(1/1000sec) screen, enter the time delay in milliseconds for scans.
Maximum=32767.
10. Select the Time stamp to use:
 None: No time stamp.
 Short: Short time stamp.
 Long: Long time stamp.