User`s manual

USER’S MANUAL
Z
-2130
8
Keying in Data via keypad
Inputting Numerical Data
 To input numerical data, press the corresponding keys.
 To save the input data, press Enter after the data is input.
 To delete the data, press CLR.
Inputting an alphabetical character
 To input an alphabetical character, first find the appropriate key. The
following table displays the numerical keys and their corresponding
alphabetical characters.
 Pr
ess the key, and the numerical character corresponding to the key will be
displayed. Pressing M2 will turn the character into the first alphabetical
one.
 Pressing M2 each time will turn the character into the next one. Eventually
it turns back into the numerical character.
For example,
 To input “M”, press “5” and then M2.
 To input “N”, press “5” and M2 twice.
 To input “o”, press “5” and M2 six times.
 Pressing M2 once more will turn “o” back into “5”.
 Keep pressing M2 until the desired character is approached. Press the
symbols are available for data inputting as shown below on the table:
Numeric Key Corresponding Characters
7 A B C a b c
8 D E F d e f
9 G H I g h i
4 J K l j k l
5 M N O m n o
6 P Q R p q r
1 S T U s t u
2 V W X v w x
3 Y Z , y z ;
0 ( @ )