User`s manual

USER’S MANUAL

Z-2130

Using the Data Collector

Refer to the following section to learn how to use the data collector.

Scan and Keying in Data (via keypad)

There are 26 keys on the data collector. You can use the PW button to power on or off

and the rest for data input or for function control.

Scanning the Barcode Data

1. In the Run Task menu, press and hold the orange SCAN button. A light beam will

be activated and shoot out from the window at the lower front end of the data

collector. Please see the Run Task section in the User’s Manual for more details.

2. Aim the beam at the barcode to be scanned. A beep will be given and the beam

will disappear if the data scanned has been successfully decoded by the data

collector. The decoded message will then be displayed in the LCD.

3. The scanned data will be stored as soon as the SCAN button is released, and the

next barcode is ready to be scanned.