ZANUSSI LAVADORA AUTOMÁTICA WASHING MACHINE TL 1093 V 146 0570 03 MANUAL DE INSTRUCCIONES INSTRUCTIONS BOOK 1
CONTENTS For the user Safety instructions For the installer 22/23 Technical information 37 Description of the appliance 24 Use of your appliance 25 Unpacking 37 Operating instructions 26/27 Installation 38 Programme chart 28/29 Levelling 38 Hints & Tips 30-32 Moving of the appliance 38 Water connection 39 Electrical connection 39 Cleaning and maintenance If something doesn't work Service 33 34/35 Installation 36 Guide to use the instruction The following symbols will be found i
SAFETY INSTRUCTIONS You must read the whole of this instruction book before you use the appliance. Follow the advice carefully. Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner. The following warnings are provided in the interest of overall safety. You must read them before the appliance is installed or used. Use This appliance is designed to be used by adults.
Safeties Lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after the end of the programme. Washing motor : in case of mechanic overloading, overvoltage, a thermic safety protects automatically the motor.
DESCRIPTION OF THE APPLIANCE Temperature selector Timer Spinning speed variator Control panel Pushbuttons Lid Handle for opening lid Lever for castors Trap door for lint filter Detergent dispenser Symbols ( ) Washing powder for programmes with pre-wash (1). ( ) Washing powder or liquid detergent for the main wash (2). ( ) Bleach compartment (3). ( ) Liquid additives (fabric softener and conditioner...) (4). (!) Liquid detergent.
USE OF YOUR APPLIANCE The control panel Never turn the programme selector when the appliance is working. TL 500 350 2 13 C 5 4 1093 V 30 6 7 1 ON/OFF pushbutton " " 5 Spinning speed variator Press the ON/OFF pushbutton, the programme starts : the control lamp lights on. It enables to select the spinning speed of your (draining) to 1000 rpm.
OPERATING INSTRUCTIONS Before using your washing machine for the first time, we recommend that you do a preliminary wash with the machine empty, as a precaution to clean the drum, tank and the product box. 1. Pour a dose of detergent in the “washing” detergent dispenser 2. Select the program B "Whites without prewash 90°C". 3. Press the On/Off button " ". 1. Place the laundry in the drum lift up the lid of the machine.
6. Select the spinning speed Choose the spinning speed suiting best to the nature of your laundry and to the degree of humidity wished at the end of the wash. to 1000 rpm cotton prog. : from synthetics prog. : from 500 350 to 800 rpm 7. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help of the indications or the programme table, according to the fibers and the fastness of the colours. 30 8.
PROGRAMMES CHART Programmes for cotton/linen Maximum load : 4,5 kg (cotton) Programmes description Temperatures Detergent Water dispensers (°C) consumption to use in liters Time in minutes A Whites with prewash 60 - 90 75 150 B Whites without prewash( ) 60 - 90 65 130 * C Resistant coloureds 40 - 60 65 105 D Delicate coloureds 30 - 40 65 85 F Rinsings 60 50 G Spinning 0 10 * (*) If the laundry can withstand the bleaching treatment.
Programmes for synthetics/delicates/wool Maximum loads : 2,0 kg (synthetics), 1 kg (wool).
HINTS AND TIPS Washing hints You are advised not to leave your laundry too long, especially when damp. Damp laundry produces moult and unpleasant smells. Moult stains cannot be removed. Sort your laundry. Study carefully the chart in this booklet explaining the symbols used on clothes labels (see page 32).
To remove paint stains, for example, use a volatile substance such as turpentine: in this case, you should wait for it to dry completely before washing. The manufacturer of your washing machine is not responsible for any damage deriving from the use of volatile, inflammable or toxic substances. At the end of the washing Damp laundry should be dried as soon as possible after finishing the wash. Knitwear and woollens should be dried flat away from direct sunlight.
Wash code symbols These symbols appear on fabric label, in order to help you choose the best way to treat your laundry. Strong wash WASH Max. wash Max. wash Max. wash Max. wash temperature 95°C temperature 60°C temperature 40°C temperature 30°C Do not wash at all Hand wash Delicate wash BLEACHING Do not bleach Bleach in cold water IRONING Hot iron max. 200°C Warm iron max. 150°C Lukewarm iron max.
CLEANING AND MAINTENANCE Make sure that the machine is unplugged and the water tap turned off before undertaking any kind of maintenance. Bodywork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning. Important : do not use methylated spirit, diluents or similar products. It is advisable, from time to time, to carry out a complete cycle without a washing load, adding a decalcifying product.
IF SOMETHING DOESN'T WORK ? Problems Solutions The wash results are not as usual Check that : was the wrong quantity or the wrong detergent added ? Insufficient detergent leads to grey washes and scale deposits in the machine. Check the quantities more exactly. were special stains pre-treated ? were programme and temperature correctly chosen ? The washing cycle is very much too long. Check that : the water pression is sufficient. the pump filter is not obstructed. there has not been a power breakdown.
IF SOMETHING DOESN'T WORK ? Problems Solutions The machine vibrates or is too noisy Check that : all the transit bolts and packing have been removed. all the feet resting firmly on the ground, the lock nuts have been secrured. the machine does not touch something. the load is sufficent. The machine empties as it fills Check that : the end of the drain hose is not too low. There is water on the floor Check that : there is not too much detergent or unsuitable detergent.
SERVICE If you have unable to identify or solve the problem, consult our ser vicing depar tment. Before telephoning, make a note of the make, model and date of purchase of your machine : the service department will require this information. Data plate You will find these informations on the data plate of the appliance. It is placed on the back of the appliance.
FOR THE INSTALLER Technical information Dimensions height with panel height without panel width depth Power supply voltage / frequency Total power absorbed Heater rating Water pressure minimum maximum Maximum load cotton synthetics wool Spinning speed cotton synthetics Electrical consumption (washing at 60°C) 895 mm 850 mm 397 mm 600 mm 230 V / 50 Hz 2300 W (10 A) 1950 W 0,05 MPa (0,5 bar) 0,8 MPa (8 bar) 4,5 kg 2,0 kg 1 kg from (draining) to 1000 rpm from (draining) to 800 rpm 1,2 kWh This appliance com
2
Water connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar (fig.1). If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before connecting the machine. Place the curved end of the outled hose into a drain pipe having a height between 70 and 100 cm from floor level (fig.
Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaranteed. If the installation must be done on a carpeted floor, the openings located at the lower part of the back of the appliance must remain free.
02/2001 4
